Features

KNOW YOUR CORDLESS JIG SAW

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

TOOLLESS BLADE CLAMP

Your saw has a blade clamp design that does not require the use of a tool (blade wrench) when installing or removing the blade. Simply lift blade clamp lock / release lever, located on front of saw, insert blade between blade clamp and saw bar as far as possible, then release lever to lock position.

NOTE: This tool is only designed to work with T-shank blades, other types of saw blades are not guaranteed to work properly.

LOCK-OFF BUTTON

Your saw is equipped with a lock-off button which reduces the possibility of accidental starting.The lock-off button is located on the handle above the switch trigger. You must depress the lock-off button in order to pull the switch trigger. The lock resets each time the trigger is released.You can depress the lock-off button from either the left or right side.

SWITCH TRIGGER

The jig saw has a variable speed switch trigger that delivers higher speed with increased trigger pressure.

BLADE STORAGE

When not in use, you can place the blades provided with your orbital jig saw in the storage compartment located on the back of the saw.

ERGONOMIC DESIGN

The design of the orbital jig saw provides for easy handling. It is designed for comfort and ease of grasp when operating in different positions and at different angles.