UNPACKING
INSTRUCTIONS
When unpacking the tool:
Carefully remove the tool and accessories from the box.
Make sure that all items listed in the packing list are in- cluded.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
PACKING LIST
1 1/8 in. (28.6 mm) Stroke Variable Speed Saw
Saw Blades (3)
Hex Key
Operator’s Manual
Case
APPLICATIONS
WARNING:
If any parts are missing do not operate your tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
This saw should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury.
You may use the reciprocating saw for the purposes listed below:
Cutting all types of wood products (lumber, plywood, paneling, composition board, and hard wood).
Cutting masonite and plastic.
Cutting drywall.
Cutting metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper.
7