Ryobi p520 manual Assembly, Unpacking, Packing List, To Install Blades

Page 10

ASSEMBLY

UNPACKING

This product requires assembly.

nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-525-2579 for assistance.

PACKING LIST

Orbital Jig Saw

Saw Blades (2)

Lanyard (not included in combo)

Operator’s Manual

Warranty Registration Card

WARNING:

If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

TO INSTALL BLADES

See Figure 3.

nRemove battery pack. See Figure 6.

nLift blade clamp lock located on front of saw.

nInsert saw blade between blade clamp and saw bar.

nClose blade clamp lever.

nReplace battery pack.

BLADE STORAGE

SAW BLADE

Fig. 2

WARNING:

Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.

BLADE STORAGE

See Figure 2.

A convenient feature on your saw is the blade storage com- partment. The blade storage compartment is located on the back of the saw. It is convenient for storing extra blades and storing blades when not in use.

nTo open: Push the door down with your thumb or finger. Place blades in blade storage compartment.

nTo close: Push the door up with your thumb or finger.

BLADE CLAMP LOCK

BLADE CLAMP

SAW BLADE

Fig. 3

10

Image 10
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionPersonal Safety General Safety RulesElectrical Safety Work AreaSpecific Safety Rules ServiceSafety Rules for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Features Product SpecificationsFeatures Unpacking AssemblyTo Install Blades Packing ListOperation Charging the Battery PackCharging a Cool Battery Pack ApplicationsInstalling the Battery Pack Charging a HOT Battery PackRemoving the Battery Pack Orbital Motion Starting / Stopping the SAWGeneral Cutting Straight CuttingAngle Cutting Bevel Cutting Plunge CuttingPositioning the Base in the Splinter Free Cutting Position SPLINTER-FREE CuttingOptional Edge Guide Battery Pack Removal Preparation for Recycling MaintenanceGeneral Maintenance BatteriesPage Service Model NO. and Serial no
Related manuals
Manual 18 pages 33.56 Kb