Chicago Electric 69067 owner manual Work Piece and Work Area Set Up

Page 10

Work Piece and Work Area Set Up

yt Safe

p tueS

Operanoti

cenane aintM

1.Designate a work area that is clean and well- lit. The work area must not allow access by children or pets to prevent distraction and injury.

2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to allow free movement while working.

3.Secure loose work pieces using a vise or clamps (not included) to prevent movement while working.

4.There must not be objects, such as utility lines, nearby that will present a hazard while working.

Page 10

For technical questions, please call 1-800-444-3353.

Item 69067

Image 10

Contents Reciprocating SAW General Power Tool Safety Warnings Table of ContentsWork area safety Electrical safety Personal safetyReciprocating Saw Safety Warnings Power tool use and careService Avoid unintentional startingVibration Safety This tool vibrates during useDouble Insulated Tools Tools with Two Prong Plugs Grounded Tools Tools with Three Prong PlugsGrounding Extension Cords SymbologyTable a Recommended Minimum Wire See Table a onSetup Before Use SpecificationsFunctions Installing the Saw Blade Tool Set UpOperating Instructions Work Piece and Work Area Set Up Plunge Cutting General Operating InstructionsGeneral Cutting Metal CuttingCleaning, Maintenance, and Lubrication Maintenance and ServicingTroubleshooting Problem Possible Causes Likely SolutionsParts List Parts List and DiagramAssembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800