Troubleshooting
Problem |
| Possible Causes |
| Likely Solutions |
Tool will not start | 1. | No power at outlet. | 1. | Check power at outlet. |
| 2. | Cord not connected. | 2. | Check that cord is plugged in. |
| 3. | Carbon Brushes may be worn | 3. | Inspect Carbon Brushes and replace if |
|
| or damaged. |
| necessary. |
Tool operates | 1. | Carbon Brushes may be worn | 1. | Inspect Carbon Brushes and replace if |
slowly or |
| or damaged. |
| necessary. |
sporadically. |
|
|
|
|
Tool does not | 1. | Blade may be damaged, worn | 1. | Check condition and type of blade. Use only |
cut effectively or |
| or wrong type for the material. |
| proper type of blade in good condition. |
blade jams in work | 2. | Too much pressure. | 2. | Ease off pressure on blade. |
material |
|
|
|
|
|
|
|
|
|
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
Blade Selection Chart
Work Material Type | Blade Length | TPI | Blade Material | |
Wood | 6 | - 12 inches | 5 - 11 | Carbon Steel |
Wood with embed- | 6 | - 12 inches | 11 | Carbide tipped Steel |
ded nails or screws |
|
|
|
|
Metal | 6 | - 9 inches | 10 - 25 | Carbide tipped Steel |
|
|
|
| or Carbide Grit |
Plastic | 6 | - 12 inches | 9 - 25 | Carbon Steel or Carbide Grit |
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 97580 | For technical questions, please call | Page 13 |