23.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
SERVICE
24.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
25.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the Masonry Saw. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Use the right product for the job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equipment, tools, or attachments. Do not use this product for a purpose for which it was not intended.
3.Make sure the Blade Cover is always securely in place. Never operate the Brick Saw without the Blade Cover. Make sure the Blade Cover does not touch the Saw Blade or any other part of the Saw.
4.Always wear safety impact eye goggles and heavy work gloves when using the Masonry Saw. Using personal safety devices reduce the risk for injury.
5.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
6.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Masonry Saw.
7.Do not force the Masonry Saw. This tool will do the work better and safer at the speed and capacity for which it was designed.
8.
WARNING! Keep hands and fingers away from cutting area and Saw Blade. Use a “push stick” (not included) if necessary.
SKU 93218 | For technical questions, please call | Page 5 |