Genesis Advanced Technologies GMSUDR15L manuel dutilisation English, General Safety Rules

English

10" Slide Compound Laser Miter Saw, 15 AMP

Operator’s Manual

Specifications:

•	Model:	GMSUDR15L
•	Rated Input:	120V~AC, 60HZ, 15A

•No Load Speed: 5,000 rpm

•	Blade Size:	10” (254mm)
•	Arbor Size:	5/8” (16mm)

•Blade Bevel: 0-45°

•	Blade Miter:	0-45° Left, 0-45° Right
•	Cutting Capacity @ 90°		3” H	x 12-1/5” W
•	Cutting Capacity @ 45°		3” H	x 8-1/4” W

•Cutting Capacity @ 0° Miter & 45° Bevel: 1-5/8” H x 12-1/5” W

•Cutting Capacity @ 45° Miter & 45° Bevel: 1-5/8” H x 8-1/4” W Laser:

-Class II Laser

-Wave Length: 650 nm

-Max Output <1.0 mw

-Runs on two AAA batteries (included)

Includes Miter Saw, 60T Carbide Tipped Blade, Hold Down Clamp, Dust Bag, Extension Wings, Rear Support Foot Bar,2-AAA Batteries for Laser and Wrenches

Warning:

To reduce the risk of injury, user must read and understand this operator’s manual before operating this tool. Save this Manual for future reference.

Toll-Free Help Line: 1-888-552-8665.

wear your	Warning:
Safety glasses
	The Operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye
	damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full face shield
foresight is better	when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
	Always wear eye protection which is marked to comply with ANSI Z87.1.
Than no sight

Look for this symbol to point out important safety precautions.

It means attention!!! Your safety is involved.

GENERAL SAFETY RULES

Warning:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

10" Slide Compound Laser Miter Saw

Operator’s Manual GMSUDR15L