Save These | Panasonic EY6432, EY6405, EY6409 guide

III.FOR

BATTERY CHARGER & BATTERY PACK

1)SAVE THESE IN-

STRUCTIONS -This

manual contains important safety and operating instructions for battery charger EY0230.

2)Before using battery charger, read all instructions and cautionary markings on

(1) battery charger, (2) battery pack.

3)CAUTION -To reduce the risk of injury, charge only Battery Pack shown below.

EY9001, EY9080, EY9065, EY9066, EY9006, EY9086, EY9101, EY9180, EY9182, EY9106, EY9107, EY9136, EY9168, EY9230, EY9200, EY9201, EY9231

Other types of batteries may burst caus- ing personal injury and damage.

4)Do not expose charger to rain or snow.

5)To reduce risk of damaging the electric plug and cord, pull by plug rather than cord when disconnecting charger.

6)Make sure cord is located so that it will not be stepped on, tripped over, or oth- erwise subjected to damage or stress.

7)An extension cord should not be used unless absolutely necessary.

Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a. that pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b. that extension cord is properly wired and in good electrical condition.

c. that wire size is large enough for ampere rating of charger as specified below.

RECOMMENDED MINIMUM AWG SIZE OF

EXTENSION CORDS FOR

BATTERY CHARGERS

AC Input Rating.	Amperes	AWG Size of Cord
Equal to or	But less	Length of Cord, Feet
greater than	than	25	50	100	150
0	2	18	18	18	16

8)Do not operate charger with damaged cord or plug—replace them immediately.

9)Do not operate charger if it has received a sharp blow, been dropped, or other- wise damaged in any way; take it to a qualified serviceman.

10)Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

11)To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or clean- ing.

12)The charger and battery pack are spe- cifically designed to work together. Do not attempt to charge any other cordless tool or battery pack with this charger.

13)Do not attempt to charge the battery pack with any other charger.

14)Do not attempt to disassemble the bat- tery pack housing.

15)Do not store the tool and battery pack in locations where the temperature may reach or exceed 122°F (50°C) (such a metal tool shed, or a car in the summer), which can lead to deterioration of the storage battery.

16)Do not charge battery pack when the temperature is BELOW 32°F (0°C) or ABOVE 104°F (40°C). This is very important.

17)Do not incinerate the battery pack. It can explode in a fire.

18)Avoid dangerous environment. Do not use charger in damp or wet locations.

— 4 —

EY6432, EY6409, EY6405 specifications

Panasonic has long been recognized for its commitment to quality and innovation in the realm of power tools, and the EY6405, EY6409, and EY6432 models exemplify this dedication. These tools are designed to meet the demanding requirements of both professional tradespeople and DIY enthusiasts, delivering performance, durability, and efficiency.

The EY6405 is a lightweight and compact cordless drill that boasts a powerful 18V lithium-ion battery. Its ergonomic design allows for comfortable handling during extended use, while the variable speed control provides versatility for a range of applications. This model features a 2-speed gearbox, enabling users to switch between high speed for drilling in wood and low speed for heavier applications such as metal drilling. Additionally, it incorporates a built-in LED light, enhancing visibility in dimly lit spaces.

On the other hand, the EY6409 is a robust impact driver that takes versatility to another level. With a high-torque output, it is ideal for driving large screws and bolts with ease. It also features an innovative brushless motor that enhances energy efficiency, thus maximizing runtime and reducing maintenance needs. The EY6409 further supports multiple torque settings, allowing users to adjust the power output depending on the task at hand, ensuring precision and control.

The EY6432 stands out as a multi-functional tool, merging the capabilities of both a jigsaw and a circular saw in one versatile design. This model is equipped with a powerful motor that delivers exceptional cutting performance across various materials, from wood to metal. The unique blade changing system enables quick and effortless swaps, minimizing downtime. Furthermore, the ergonomic grip and weight distribution enhance user comfort, making it suitable for prolonged use.

All three tools benefit from Panasonic's advanced battery technology, ensuring longer run times and shorter charging periods, which is critical for professionals in the field. Moreover, their durable construction and reliable performance make them suitable for even the toughest job sites.

In summary, the Panasonic EY6405, EY6409, and EY6432 each bring distinct advantages to any toolkit. Whether it’s drilling, driving, or cutting, these tools combine cutting-edge technologies with user-friendly features to support a wide array of tasks, making them invaluable assets for both professional and amateur craftsmen alike. With Panasonic’s ongoing commitment to innovation, these models are sure to be at the forefront of power tool advancements, catering to the needs of today’s users.