Turn the thrust plate to remove | Panasonic EY6950-U1 manual

EY6950-U1

Ref. No. 2C	Procedure 2A → 2B → 2C	Removal or attachment of the Gear Box Block.
		(Removal)
		1.	Turn the thrust plate to remove.
		2.	The internal parts of gear box block can be removed one after
		another. (See Fig. 8)

(Attachment)

1.Start from inserting 6 pins into the driving block as shown in the Fig. 9.

2.Assemble the other parts in reverse order as shown in the Fig. 8.

3.Install steel balls, pins and clutch springs into 6 holes. (See Fig. 10)

NOTE:

Carrier, Ring gear, and Clutch plate have their own correct directions for proper assembly.

Fig. 8

Fig. 9

Fig. 10

Turn the thrust plate to remove.