Makita BHP458 (LXPH03*1) dimensions F/R Change Lever, Switch plate complete, Cushion

P 8/ 12

Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. F/R Change Lever	Fig. 15
ASSEMBLING
	Prong
Put the projection on Switch between the prongs of F/R change lever. (Fig. 15)
	Projection

[3] -4. Switch plate complete

ASSEMBLING

Set Switch plate complete in place. (Fig. 16)

Fig. 16

Insert Switch plate complete to Housing L,		Housing R side
facing its symbol of Fuel gauge to
Housing R side.
Note: Switch plate complete with	Switch plate
	complete
faced in the wrong direction
	Housing L
can not be inserted to
Housing L.		Symbol of
		Fuel gauge

[3] -5. Parts related to Drip-proof structure

ASSEMBLING

Assemble Sponge B to Housing L. And assemble Seal and Sponge A to Housing L as drawn in Fig. 17.

Fig. 17

Assemble Sponge B to Housing R		Note: To assure Drop-proof, use new Sponge A and Sponge B.
to the portion designated with		Assemble Sponge A to Seal.	Assemble the Seal to
gray color.
		Note: Edge of the assembled Sponge A	Housing L as drawn below.
Sponge B	Housing R	has to be flat to the surface of Seal.
			Housing L
		Sponge A

Seal

[3]-6. Cushion		Fig. 18R	Fig. 18F
	ASSEMBLING
		[Correct]	[Wrong]

Be sure to install Cushion into

Housing set (L) as drawn in Fig. 18R.

Note: Fig. 18F is the wrong installation.

Pay attention to the direction.

Housing set (L) Cushion

Housing set (L) Cushion