Makita 6510LVR instruction manual Specific Safety Rules, Symbols

Page 3

rate for which it was designed.

17.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

19.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

20.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

21.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

22.Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

Service

23.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

24.Follow instruction for lubricating and changing accessories.

25.Keep handles dry, clean and free from oil and grease.

GEB002-2

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to drill safety rules. If you use this power tool unsafely or incorrectly, you can suffer serious personal injury.

1.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock

the operator.

2.Always be sure you have a firm footing.

Be sure no one is below when using the tool in high locations.

3.Hold the tool firmly.

4.Keep hands away from rotating parts.

5.Do not leave the tool running. Operate the tool only when hand-held.

6.Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin.

7.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

USD201-2

Symbols

The followings show the symbols used for tool.

volts

amperes

hertz

alternating current

no load speed

Class II Construction

revolutions or reciprocation per minute

3

Image 3
Contents Drill Perceuse Taladro Specifications General Safety RulesEnglish Original instructions Symbols Specific Safety RulesAssembly Functional DescriptionOperation Warranty Policy MaintenanceAccessories Makita Limited ONE Year WarrantyRègles de sécurité générales Conservez CE Mode DemploiFrançais Mode d’emploi original SpécificationsRègles DE Sécurité Particulières Avertissement SymbolesDescription DU Fonctionnement InterrupteurEntretien Installation ou retrait du foretAssemblage UtilisationAccessoires Garantie Limitée D’UN AN MakitaPolitique de garantie Español Instrucciones originales EspecificacionesNormas Generales DE Seguridad Guarde Estas InstruccionesServicio de mantenimiento Normas Específicas DE Seguridad Advertencias y precaucionesAdvertencia Descripción DEL FuncionamientoSímbolos Accionamiento del interruptorInstalación o desmontaje de la broca EnsambleOperación MantenimientoPolítica de garantía AccesoriosAdvertencia