LOCK-ON Button | Genesis Advanced Technologies GHD1260 specification

English

slowly increasing the pressure on the switch trigger, tool speed will gradually increase until reaching maximum rated RPM.

To start the tool, simply pull the switch trigger. Increase tool speed by applying more pressure on the switch trigger. To stop the tool, release the switch trigger.

“LOCK-ON” BUTTON

The “Lock-On” button is located in the handle of your tool, beside the switch trigger and allows you to continuously operate the drill at a preset RPM without holding down the switch trigger.

To lock the trigger “On”, pull the switch trigger back fully, depress the “Lock-On” button and release the trigger. To unlock the trigger, squeeze the trigger back completely then release it without depressing the “Lock-On” button.

caution:

Use caution when locking the tool in the “ON” position and maintain a firm grasp on the tool.

warning:

If the “Lock-On” button is continuously being depressed, the trigger cannot be released.

SPEED CONTROL DIAL

This feature enables you to preset the tool for a desired RPM when using the “Lock-On” button feature. The tool speed is adjusted by rotating the “speed control” dial clockwise to increase the speed and counter-clockwise to decrease the speed. Once you have set the speed you desire, when the switch trigger is completely depressed and the “Lock-On” button engaged, the tool speed will change to the speed you dialed in.

To preset a desired RPM, pull the trigger back completely and engage the “Lock-On” button. Maintain a firm grasp on the running drill with one hand and use your free hand to rotate the “speed control” clockwise or counter-clockwise until the desired drill speed is reached. Then pull the trigger back and release it to disengage the “Lock-ON” feature.

Once you’ve dialed in the desired drill speed, when you start the drill and engage the trigger “Lock-On” button the drill will change to the speed you set with the “speed control” dial.

FORWARD/REVERSE LEVER

Located above the trigger is the forward/reverse lever. This lever is designed to allow you to select the direction the drill chuck rotates. For drilling, hammer drilling and driving screws, the drill is run in the forward or clockwise direction. Reverse or counter-clockwise rotation, is generally used to help back out a drill bit from a hole and screw removal.

*For forward rotation, move the lever to the right. *For reverse rotation, move the lever to the left.

(*Note: with the drill chuck pointing away from you)

caution:

Do not change the direction of rotation until the tool comes to a complete stop. Moving the “forward/reverse” lever while the drill chuck is rotating can cause damage to the tool.

caution:

Always check the direction of rotation before tool operation.

caution:

This drill is not designed for hammering in the reverse or counter-clockwise direction. Failure to comply with this caution may cause property damage.

MODE SELECTOR SWITCH

The mode selector switch gives you the ability to operate this tool in two different modes. One setting provides rotation only for driving screws and drilling holes in wood, metal, plastic and other non-concrete material. The rotation only mode is also used for stirring paint, sanding, wire brushing, etc. The second mode provides rotation and hammering action. Rotation with hammering action gives you the ability to bore holes in concrete, asphalt, tile, brick or other similar hard materials.

To select the rotation only or drill mode, move the selector switch completely to the right, toward the drill symbol .

To select the rotation with hammering action or hammer drill mode, move the selector switch completely to the left, toward the hammer symbol .

1⁄2” 6 Amp Dual Purpose Hammer Drill

Operator’s Manual

GHD1260

GHD1260 specifications

Genesis Advanced Technologies has made a significant mark in the world of high-quality audio equipment, and the GHD1260 headphones stand as a testament to their commitment to excellence. Designed for both audiophiles and casual listeners alike, these headphones boast an array of features and technologies that elevate the listening experience to new heights.

One of the standout characteristics of the GHD1260 is its exceptional sound quality. The headphones employ advanced driver technology, allowing for an expansive soundstage and precise audio reproduction across the frequency spectrum. The 60mm dynamic drivers deliver powerful bass response while maintaining clarity in mids and highs. This balanced sound signature makes the GHD1260 versatile enough for various music genres, from classical to electronic.

Comfort is another key aspect of the GHD1260. The headphones are designed with ergonomics in mind, featuring plush ear cushions and an adjustable headband that ensures a secure yet comfortable fit. Whether you’re enjoying a long listening session at home or on the go, the lightweight design minimizes fatigue, enabling extended use without discomfort.

In terms of build quality, the GHD1260 is crafted using premium materials. The sturdy construction not only adds durability but also contributes to the acoustic performance, reducing unwanted resonance. The sleek finish and modern aesthetic make these headphones an attractive accessory for any music lover.

Connectivity options further enhance the usability of the GHD1260. The headphones include both wired and wireless capabilities, with Bluetooth support for hassle-free listening without the constraints of cables. The battery life is impressive, offering multiple hours of playtime on a single charge, perfect for those who are constantly on the move.

Furthermore, the GHD1260 features intuitive controls, allowing users to manage playback and take calls seamlessly. The integration of a built-in microphone adds functionality, making these headphones suitable for hands-free communication.

In summary, Genesis Advanced Technologies GHD1260 headphones combine superior sound quality, comfort, and robust build materials with advanced connectivity options and user-friendly features. They cater to the needs of any audio enthusiast, ensuring an immersive and enjoyable listening experience that stands out in today's competitive audio market.