Drilling/screwdriving
uSelect forward or reverse rotation using the forward/ reverse slider (2).
uTo switch the tool on, press the switch (1). The tool speed depends on how far you press the switch.
uTo switch the tool off, release the switch.
Hints for optimum use
Drilling
uAlways apply a light pressure in a straight line with the drill bit.
uJust before the drill tip breaks through the other side of the workpiece, decrease pressure on the tool.
uUse a block of wood to back up workpieces that may splinter.
uUse spade bits when drilling large diameter holes in wood.
uUse HSS drill bits when drilling in metal.
uUse masonry bits when drilling in soft masonry.
uUse a lubricant when drilling metals other than cast iron and brass.
uMake an indentation using a centre punch at the centre of the hole to be drilled in order to improve accuracy.
Screwdriving
uAlways use the correct type and size of screwdriver bit.
uIf screws are difficult to tighten, try applying a small amount of washing liquid or soap as a lubricant.
uAlways hold the tool and screwdriver bit in a straight line with the screw.
Maintenance
Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Your charger does not require any maintenance apart from regular cleaning.
Warning! Before performing any maintenance on the tool, remove the battery from the tool. Unplug the charger before cleaning it.
uRegularly clean the ventilation slots in your tool and charger using a soft brush or dry cloth.
uRegularly clean the motor housing using a damp cloth. Do not use any abrasive or
uRegularly open the chuck and tap it to remove any dust from the interior.
Protecting the environment
Z Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product zavailable for separate collection.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our
Batteries
Z Black & Decker batteries can be recharged many times. At the end of their useful life, discard batteries with due care for our environment:
uRun the battery down completely, then remove it from the tool.
uNiCd, NiMH and
9