Chicago Electric 69452 owner manual Troubleshooting, Problem Possible Causes Likely Solutions

Page 11

Troubleshooting

Problem

 

Possible Causes

 

Likely Solutions

Tool will not start.

1.

Cord not connected.

1.

Check that cord is plugged in.

 

2.

No power at outlet.

2.

Check power at outlet. If outlet is unpowered,

 

 

 

 

turn off tool and check circuit breaker. If breaker

 

 

 

 

is tripped, make sure circuit is right capacity

 

 

 

 

for tool and circuit has no other loads.

 

3.

Tool’s thermal reset breaker

3.

Turn off tool and allow to cool.

 

 

tripped (if equipped).

 

Press reset button on tool.

 

4.

Internal damage or wear.

4.

Have technician service tool.

 

 

(Carbon brushes or

 

 

 

 

switch, for example.)

 

 

Tool operates slowly.

Extension cord too long or

Eliminate use of extension cord. If an extension

 

cord diameter too small.

cord is needed, use one with the proper diameter

 

 

 

for its length and load. See Extension Cords

 

 

 

in Grounding section on page 6.

Performance

1.

Bit dull or damaged.

1.

Keep cutting accessories sharp. Replace as needed.

decreases over time.

2.

Carbon brushes worn

2.

Have qualified technician replace brushes.

 

 

or damaged.

 

 

Excessive noise

Internal damage or wear. (Carbon

Have technician service tool.

or rattling.

brushes or bearings, for example.)

 

 

Overheating.

1.

Forcing tool to work too fast.

1.

Allow tool to work at its own rate.

 

2.

Bit misaligned.

2.

Check and correct bit alignment.

 

3.

Bit dull or damaged.

3.

Keep cutting accessories sharp. Replace as needed.

 

4.

Blocked motor housing vents.

4.

Wear ANSI-approved safety goggles and

 

 

 

 

NIOSH‑approved dust mask/respirator while

 

 

 

 

blowing dust out of motor using compressed air.

 

5.

Motor being strained by long or

5.

Eliminate use of extension cord. If an extension

 

 

small diameter extension cord.

 

cord is needed, use one with the proper diameter

 

 

 

 

for its length and load. See Extension Cords

 

 

 

 

in Grounding section on page 6.

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.

Safety

Setup

Operation

Maintenance

Item 69452

For technical questions, please call 1-800-444-3353.

Page 11

Image 11
Contents Heavy Duty Drill Work area safety Table of ContentsGeneral Power Tool Safety Warnings Safety Setup Operation Maintenance Electrical safetyPersonal safety Fet Sa Setu Power tool use and careService Drill Safety WarningsOperation Maintenance Vibration SafetySafety Setu No ratiepO Grounded Tools Tools with Three Prong PlugsDouble Insulated Tools Tools with Two Prong Plugs Fet Sa25´ 50´ 75´ 100´ 150´ SymbologySafety Setup Extension CordsFunctions AssemblySpecifications Setup Before UseOperating Instructions Tool Set UpWorkpiece and Work Area Set Up General Operating InstructionsMaintenance and Servicing Cleaning, Maintenance, and LubricationProblem Possible Causes Likely Solutions TroubleshootingQty Part Description Parts ListParts List and Diagram Part DescriptionAssembly Diagram Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Limited 90 Day Warranty

69452 specifications

The Chicago Electric 69452 is a versatile and reliable arc welder known for its robust performance and user-friendly features. This welding machine stands out in the market due to its blend of affordability, portability, and efficiency, making it a preferred choice for both novice and experienced welders.

One of the main features of the Chicago Electric 69452 is its dual-voltage capability. It can operate on both 115V and 230V power supplies, allowing users to utilize it in different environments, whether working in a home garage or an industrial setting. This flexibility ensures that the welder can adapt to various power availability scenarios, making it an essential tool for welding projects on the go.

The Chicago Electric 69452 is an inverter welder, which means it utilizes advanced inverter technology to convert direct current (DC) into alternating current (AC). This not only enhances the performance of the machine, allowing for smoother and more consistent welding arcs, but it also contributes to a more compact and lightweight design. Unlike traditional transformers, inverter technology reduces the overall size and weight of the welder, making it easy to transport.

Another notable characteristic is the adjustable welding current control. Users can easily modify the voltage and amperage settings to suit different types of welding tasks, from thin metal sheets to thicker materials. This adjustability ensures precise and high-quality welds across a variety of applications.

The Chicago Electric 69452 is equipped with safety features that enhance user protection. The built-in overload protection prevents the machine from overheating during extended use, which prolongs its lifespan and ensures reliability. Additionally, the welder's design incorporates a cooling fan that helps dissipate heat, further safeguarding the device and enhancing performance.

With its ability to handle a variety of welding rods, including stick and flux-cored wire, the Chicago Electric 69452 caters to diverse welding needs. The machine also delivers strong and stable arcs, enabling welders to create strong joints with less spatter and cleaner finishes.

In summary, the Chicago Electric 69452 is an efficient, portable, and feature-rich arc welder that appeals to both hobbyists and professionals. Its dual-voltage capability, inverter technology, adjustable current settings, and safety features make it an excellent choice for anyone looking to take on welding projects of varying complexity and scale.