g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5.Battery tool use and care
a.Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b.Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c.When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d.Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
6.Service
a.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Drill and Impact Drill Safety
Warnings
1.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a ″live″ wire will make exposed metal parts of the tool ″live″ and shock the operator.
2.Let bit cool before touching, changing or adjusting it. Bits heat up dramatically while in use, and can burn you.
3.If the drill bit jams, release the trigger immediately; drill torque can cause injury or break bit.
4.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
5.Avoid unintentional starting. Prepare to begin work before turning on the tool.
6.Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.
7.When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting torque.
8.Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
9.The battery charger gets hot during use. The charger’s heat can build up to unsafe levels and create a fire hazard
if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment.
SKU 69360 | For technical questions, please call | Page 4 |