Craftsman 172.28129 Unpacking, Description, Parts List Fig, Know Your Hammer Drill Fig

Page 6

UNPACKING

!WARNING: Your tool should NEVER be connected to the power source when you are assembling parts, making adjustments, installing or removing bits, cleaning or when it is not in use. Disconnecting the drill will prevent accidental starting, which could cause serious personal injury.

1.Remove the hammer drill from the storage / carry case and inspect it carefully to make sure that no breakage or damage has occurred during shipping.

2.Do not discard any of the packing materials until all parts are accounted for.

3.Included with this hammer drill is an auxiliary handle, a depth stop rod, and a chuck key.

4.If any of the parts are damaged or missing (refer to PARTS LIST below), return the saw to your nearest Sears store or Craftsman outlet to have the tool replaced.

!WARNING: If any parts are missing, DO NOT operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

PARTS LIST (Fig. 1)

1. Hammer Drill

2. Auxiliary Handle

3. Depth Stop Rod

4. Chuck Key

5. Carrying / Storage Case

6. Operator’s Manual

!WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

10

DESCRIPTION

KNOW YOUR HAMMER DRILL (Fig. 2)

NOTE: Before attempting to use this product, familiarize yourself with all operating features and safety rules.

Your Hammer Drill has a precision-built electric motor and it should be connected to a

120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate on direct current (DC). The large voltage drop will cause a loss of power and the motor will overheat. If the drill does not operate when plugged into correct 120-volt, 60-Hz AC ONLY outlet, check the power supply. This hammer drill has a 10-ft., 2-wire power cord

(no adapter needed).

This Hammer Drill has the following features:

1.8.0 Amp Motor

Provides torque, power and durability to handle continuous heavy-duty rotary or hammer drilling jobs

2.Mode Selector Switch

For easy changes to rotary or hammer drilling applications

3.Rotary Drilling

Variable speed 0-2800 / min (no-load speed) allows matching drilling / driving speed to bits and materials in a variety of job applications such as hard or soft woods, metal and various building materials.

4.Forward / Reverse Lever

Conveniently located, reverse to back out screws and jammed bits when rotary drilling / driving

5.Hammer Drilling

Variable speed 0-44,800 BPM (blows per minute) impact rate, for fast drilling in concrete, brick, stone and tile

6.Variable Speed Trigger Switch

Controls speed, increase pressure for higher speed and torque

7.Power Lock-on Button

For use in continuous stationary hammer drilling applications

8.1/2-in. Keyed Steel Chuck

Tighten bits quickly and securely with chuck key and spindle lock

9.Spindle Lock

Manually lock chuck’s spindle shaft for safe, secure tightening of bits in chuck

10.360° Auxiliary Handle and Rear Handle with Soft-Grip

Provides maximum balance, control and gripping comfort. Auxiliary handle mounts in any position for left or right hand use

11.Depth Stop Rod

Mounts in auxiliary handle and adjusts for precise pre-set drilling depths

12.Bubble Level

Helps provide more accurate right angle drilling / driving and hammer drilling straight into workpiece

13.Live Tool Indicator

Green LED light lets you know when drill is plugged into power source

11

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Maintenance WarrantySafety UnpackingSafety Symbols Table of ContentsSafety Instructions Safety InstructionsService Safety Electrical SafetySafety Symbols for Your Tool Safety Rules for Hammer DrillsSafety Rules for Hammer Drills Additional Rules for Safe OperationDescription Parts List FigUnpacking Know Your Hammer Drill FigThis Hammer Drill has the following features Variable Speed Trigger Switch FigRotary and Hammer Drilling Mode Selector Switch Fig High Impact-Resistant HousingOperation Installing and Removing Operating the Hammer Drill AS a Drill / DriverRotary Drilling Operating the Drill AS a Hammer DrillHammer Drilling Fig Routine Maintenance MaintenanceMaintenance Chuck Removal , 16a and 16bParts Lists AccessoriesTo Retighten a Loose Chuck Figs and 17a Hammer Drill Model Number Get it fixed, at your home or ours

172.28129 specifications

The Craftsman 172.28129 is a highly regarded tool within the Craftsman line, a brand synonymous with durability, reliability, and performance. This particular model exemplifies the quality craftsmanship that has made Craftsman a household name among DIY enthusiasts and professional contractors alike.

One of the standout features of the Craftsman 172.28129 is its robust construction. Designed with high-grade materials, this tool offers exceptional durability, making it ideal for both indoor and outdoor applications. The ergonomic design ensures user comfort even during extended use, minimizing fatigue and enhancing operational efficiency. The tool is lightweight, which contributes to easy maneuverability and better control.

Equipped with a powerful motor, the Craftsman 172.28129 delivers impressive performance across various tasks. Whether you're tackling heavy-duty projects or simple home repairs, this model offers the versatility needed to complete any job with ease. The motor's design focuses on energy efficiency, providing optimal performance without excessive power consumption.

The Craftsman 172.28129 also incorporates advanced technology that enhances usability and precision. Its intuitive controls allow for easy adjustments, ensuring users can adapt the tool to their specific needs quickly. Additionally, the model features a built-in safety mechanism, promoting secure operation and reducing the risk of accidents during use.

Another key characteristic of the Craftsman 172.28129 is its compatibility with a range of accessories, making it a versatile addition to any tool collection. Users can easily switch between attachments to tackle various tasks, from cutting and sanding to polishing and shaping. This flexibility saves both time and money, as one tool can handle multiple functions.

The Craftsman brand also places a strong emphasis on customer satisfaction, which is evident in the comprehensive warranty that accompanies the 172.28129 model. This warranty provides peace of mind, assuring users that Craftsman stands behind the quality and reliability of their products.

In conclusion, the Craftsman 172.28129 is an exemplary tool that embodies the brand's commitment to excellence. With its sturdy construction, powerful motor, advanced technology, and compatibility with various accessories, it stands as a top choice for anyone looking to enhance their toolkit. Whether for professional use or personal projects, this tool is designed to deliver consistent performance, making it an essential investment for any handyman or contractor.
Top Page Image Contents