Craftsman 315.111920 owner manual Important Information for

Page 5

RULES FOR SAFE OPERATION (Continued)

•An extension cord should not be used unless

absolutely necessary. Use of improper extension cord could result in a risk of fire and

electric shock. If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size and shape as those of plug on charger.

b.That extension cord is propedy wired and in good electrical condition; and

c.That wire size is large enough for AC ampere rating of charger as specified below:

Cord Length (Feet) 25' 50' 100' 150'

Cord Size (AWG) 16 16 16 14

Note: AWG = American Wire Gage

DO NOT OPERATE CHARGER WITH A DAMAGED CORD OR PLUG. If damaged,

have replaced immediately by a qualified serviceman.

•Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.

•Do not disassemble charger;,take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shook or fire.

•To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.

•Do not use charger outdoors.

•Disconnect charger from power supply when not in use.

SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who

may use this tool. If you loan someone this tool, loan them these instructions also.

ALook for this symbol to point out important safety precautions. It means attention!H Your safety is involved.

IMPORTANT INFORMATION FOR

When using your drill continuously, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge.

Note: This situation only occurs when continuous use of your drill causes the batteries to become hot. It

RECHARGING HOT BA'n'ERIES

does not occur under normal circumstances. Refer to "CHARGING BATTERY PACK" for normal recharg- ing of batteries. If the charger does not charge your battery pack under normal circumstances, return both the battery pack and charger to your nearest Sears repair center for electrical check.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail Stores.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Craftsman Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL SpecificationsRead ALL Instructions Symbol Meaning Safety Alert SymbolRemove Adjusting Keys Do not Charge Battery Tool in a Damp or WET Location Important Safety Rules for Battery ToolsDrilling or Driving Screws Into Do not expose charger to rain or snowImportant Information for See Figure Know Your DrillWrist Strap Pack WriststrapTo Charge Tobeful chargedTo Remove Battery Pack Switch Trigger TWO SpeedLatches Depresslatches To Release Batterypack SeeFigure5 Keyless ChuckLOC Forward Right Installing BitsChuckbody Chuckjaws Drillbit Chuckcollar Removing BitsLevel Drilling DrillingSee Figures 10, 11, Chuck RemovalMallet Keylesschuck Chuckjaws Allen Wrench To Retighten a Loose ChuckBatteries Page Craftsman 3/8 Inch Cordless Drill Model no Parts ListSee Back page for Parts Ordering Instructions Mmmmm

315.111920 specifications

The Craftsman 315.111920 is a versatile and powerful tool designed for both professionals and DIY enthusiasts. As one of Craftsman’s standout products, this tool offers an impressive combination of features and technologies that make it an essential addition to any workshop.

One of the main features of the Craftsman 315.111920 is its robust motor. With a high-performance design, it ensures reliability and durability, even during the most demanding tasks. The motor is optimized for heavy-duty applications, allowing users to tackle everything from intricate woodworking projects to tough metal fabrication with ease.

Another characteristic that sets this tool apart is its user-friendly design. The ergonomic handle provides a comfortable grip, minimizing fatigue during extended usage. This thoughtful design enhances control, making it easier to manage precision work. Additionally, the tool is equipped with a well-placed power switch, allowing for easy access and operation.

The Craftsman 315.111920 also features adjustable speed control, adding to its versatility. Users can select the appropriate speed setting for their specific tasks, making it adaptable for various materials. Whether cutting through softwood or harder materials like plywood or metal, the tool's adjustable speed ensures optimal performance and results.

For safety, the Craftsman 315.111920 includes built-in safety features. A blade guard is incorporated to protect users from accidental contact while the tool is in operation. Furthermore, the well-engineered design minimizes vibrations, providing smoother operation and enhancing user safety.

In terms of technology, this tool is designed with durability in mind. High-quality materials are used throughout its construction, ensuring long-lasting performance. The tool also incorporates innovative engineering that promotes cooling, which prevents overheating during extended use, thus extending its lifespan.

Overall, the Craftsman 315.111920 stands as a testament to the brand’s commitment to providing high-quality tools that meet professional standards. Its combination of power, versatility, and user-centric design makes it an ideal choice for anyone looking to enhance their crafting experience. Whether for home projects or professional use, this tool offers the reliability and performance that Craftsman is known for.
Top Page Image Contents