SPECIFICATIONSFunctions
Electrical | 120 V~ / 60 Hz / 15 A | ||
Input | |||
|
| ||
Blows Per | 950 BPM | ||
Minute | |||
|
| ||
Chisel | 1 | Bull Point (included) | |
|
| ||
Weight | 71 lb. | ||
|
|
| |
| 1 | Oil Bottle | |
Other | 1 | Carbon Brush Set | |
1 | Flat Chisel | ||
Accessories | |||
4 Hex Keys (5mm, 6mm, 8mm, 12mm) | |||
| 1 | Oil Tank Wrench | |
|
| E252823 | |
UNPACKING
When unpacking, make sure the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1‑800‑444‑3353 as soon as possible.
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding
the parts listed in the following pages, refer to the Assembly Diagram
near the end of this manual.
Use Figure 1 below as reference during Tool Setup and Operation.
Fan Cover (10)
Switch Trigger
Side Handle(82)
(31A)
| Main Handle |
Housing (1) | (86) |
|
Switch Lock
Pin (84)
Aluminum 
Casing (60)
Front
Cover (75)
Lock
Lever (74)
Figure 1
Page 8 | For technical questions, please call | SKU 68147 |