ENGLISH (Original instructions)
SPECIFICATIONS
| Model | BHR200 | |
|
| Concrete | 20 mm |
Capacities |
| Steel | 13 mm |
|
| Wood | 27 mm |
| No load speed | 0 - 1,100 | |
| Blows per minute | 0 - 4,700 | |
| Overall length | 316 mm | |
| Net weight | 3.8 kg | |
| Rated voltage | D.C. 24 V | |
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications and battery cartridge may differ from country to country.
•Weight, with battery cartridge, according to
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use. 
･ Read instruction manual.
Cd | ･ Only for EU countries |
| |
Do not dispose of electric equipment or | |||
| battery pack together with household | ||
| waste material! |
|
|
| In observance of European Directive | ||
| 2002/96/EC on waste electric and | ||
| electronic equipment, 2006/66/EC | on | |
| batteries and accumulators and waste | ||
| batteries and accumulators and their | ||
| implementation | in accordance | with |
| national laws, | electric equipment | and |
battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Vibration
The vibration total value
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 14.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : chiseling
Vibration emission (ah,CHeq) : 12.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.
•The declared vibration emission value may also be used in a preliminary assessment of exposure.
Intended use
The tool is intended for hammer drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
Noise
The typical
Sound pressure level (LpA) : 87 dB(A)
Sound power level (LWA) : 98 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
WARNING:
•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.
•Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
2