Connecting to a VCR

		For TVs with a mono audio input:
		-	Connect the yellow plug on the V-MOTIONTMcable to the
			yellow video input terminal on your TV.
		-	Connect the white or red plug on the V-MOTIONTMcable to
		-	Connect the white or red plug on the V-MOTIONTMcable to
Yellow	White Red		the white or red audio input terminal on your TV.

If there is no video IN and audio IN terminal on your TV set, you can connectV-MOTIONTMto a VCR.

-Connect the yellow plug on theV-MOTIONTMcable to the yellow video input terminal on your VCR.

-Connect the white and red plugs on the V-MOTIONTMcable to

the white and red audio input terminals on your VCR.

To Begin Play

V-MOTIONTMConsole

•Make sure the unit is turned OFF.

•Insert a Smartridge™ into the Smartridge™ slot on the front of the main unit. The Smartridge™ should lock into place. Please use care when removing the Smartridge™ from the slot.

•Turn on the TV.

•Set your TV input mode to accept input from the port to which V-MOTIONTMis connected. In many cases this will involve setting the TV to “video” mode; however, since all TVs vary, please refer to your TV or VCR manual for further details.

•Turn the V-MOTIONTMActive Learning System on by pressing the ON/RESTART Button.

Notice: V-MOTIONTMcan play both V-MOTIONTMand V.SMILE® Smartridges™.

Using theV-MOTIONTMWireless Controller

How to Attach the Wrist Strap to the Controller

• Locate the wrist strap attachment on the bottom of the controller. Attach the wrist strap through the hole. (Figure 1)

•Place your hand through the wrist strap, so that the strap fits comfortably on your wrist. Hold the controller firmly in your hands while playing. (Figure 2)

(Figure 1)

(Figure 2)

Connecting to the Console - One-Player Mode

•Locate the OFF/Player 1/Player 2 Switch on the bottom of the controller. Move the switch to Player 1. (Figure 3)

•Make sure the controller’s Motion Sensor Signal is directly facing the V-MOTIONTMconsole . (Figure 4)

•When the direction lights and the light on the V-MOTIONTMconsole stop blinking, the connection is complete. (Figure 5)

•Move the OFF/Player 1/Player 2 Switch to OFF when controller is not in use. (Figure 6)

(Figure 3)

(Figure 4)

(Figure 5)

(Figure 6)

Connecting to the Console - Two-Player Mode

•Locate the OFF/Player 1/Player 2 Switch on the bottom of the controller. Move the switch to Player 2. (Figure 7)

•Repeat the steps above to be sure the controller is connected for Player 2.

(Figure 7)

Connect V.SMILE® Accessories or Wired Controller toV-MOTIONTM

Pull down the rubber flap on the front of the V-MOTIONTMconsole. Plug the V.SMILE® accessory or controller into the port.

Note: When both a V-MOTIONTMwireless controller and a V.SMILE® wired controller or accessory are connected, the wired unit will register as Player 1. Please set the wireless controller to Player 2.

V-MOTIONTMPlay Guidelines

For Best Results While Playing Games

The recommended distance between theV-MOTIONTMconsole and wireless controller is three to 15 feet.

For best results, put the V-MOTIONTM	CAUTION-Adequate Space Required
console in front of the TV. Then align	Be sure you have enough space around you during
the center of the V-MOTIONTMconsole	game play. To avoid injury or damage, make sure
with the center of the TV.	other people or objects are not within your range
	of motion.

•For best results, put the V-MOTIONTMconsole in front of the TV. Then align the center of the V-MOTIONTMconsole with the center of the TV.

•Avoid blocking the signal between the V-MOTIONTMconsole and wireless controller.

•The optimal distance between the V-MOTIONTMconsole and wireless controller is three to 15 feet.

•Avoid having bright light sources, including sunlight, that shine behind or near the TV toward the controller.

•Avoid having other radio-frequency devices in the game play area.

•Avoid putting the V-MOTIONTMconsole on a metal table or near metal objects.

CAUTION

WEAR THE WRIST STRAP WHEN USING THE V-MOTIONTMCONTROLLER.

•Make sure all players use the wrist strap.

•When sharing the V-MOTIONTMCONTROLLER among multiple players, make sure each person uses the wrist strap properly.

•Wearing the wrist strap will prevent you from accidentally dropping or throwing the controller during game play, which could damage the controller or surrounding objects, or cause injury to other people.

ALLOW ADEQUATE SPACE AROUND YOU DURING GAME PLAY

•Adequate space is required during game play. Stay at least 15 feet away from the TV.

•As you move around during game play, make sure objects and other people are out of your range of movement to prevent damage or injury.

DO NOT LET GO OF THE V-MOTIONTMCONTROLLER DURING GAME PLAY

•Read the user’s manual booklet for the game you are playing and follow all game control instructions for correct use of the V-MOTIONTMcontroller or accessories.

•Hold the controller securely and avoid excessive motion, as it may cause you to let go of the controller and may break the wrist strap.

•If your hands become moist, stop and dry your hands.

V-MOTIONTMPlay Guidelines

Using the V-MOTIONTMWireless Controller

Make sure all players wear the wrist strap securely on their wrist and hold the controller with both hands during play.

CAUTION : Use the Wrist Strap

Basic Operations

The following demonstrates the basic operations of the V-MOTIONTMwireless controller. Operations will vary per game. Read the Smartridge™ user’s manual for the game you are playing, and follow its instructions.

Move the controller from bottom to top.

Shake the controller from side-to-side.

Tilt the controller right or left.

Tilt the controller forward or backward.

Drive

Note : The V-MOTIONTMwireless controller is not compatible with the original V.Smile® TV Learning System.

•Insert the V.LinkTM into the V.LinkTM port. Be sure the sliding button side of the V.LinkTM is facing up for proper placement.

•The V.LinkTM’s green indicator light will turn on to let you know the V.LinkTM is transferring information.

•For more details, please see the V.LinkTM User’s Manual.

Care & Maintenance

1. Keep yourV-MOTIONTMclean by wiping it with a slightly damp cloth. Never use solvents or abrasives.

2. Keep it out of direct sunlight and away from direct sources of heat.

3. Remove the batteries when not using it for an extended period of time.

4. Avoid dropping it. NEVER try to dismantle it.

5. Always keep the V-MOTIONTMaway from water.

6. The AC adaptor should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of such damage, theV-MOTIONTMmust not be used with this adaptor until the damage has been repaired.

WARNING

A very small percentage of the public, due to an existing condition, may experience epileptic seizures or momentary loss of consciousness when viewing certain types of flashing colors or patterns, especially on television. While theV-MOTIONTMdoes not contribute to any additional risks, we do recommend that parents supervise their children while they play video games. If your child experiences dizziness, altered vision, disorientation, or convulsions, discontinue use immediately and consult your physician.

Please note that focusing on a television and LCD screen at close range and handling joystick controls for a prolonged period of time may cause fatigue or discomfort. We recommend that children take a 15 minute break for every hour of play.

Trouble shooting

Technical Support

If you have a problem that cannot be solved by using this manual, we encourage you to visit us online or contact our Consumer Services Department with any problems and/or suggestions that you might have. A support representative will be happy to assist you.

Before requesting support, please be ready to provide or include the information below:

• The name of your product or model number (the model number is typically located on the back or bottom of your product).

• The actual problem you are experiencing.

• The actions you took right before the problem occurred.

Internet : www.vtechkids.com

Phone : 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada

Other Info

Disclaimer and Limitation of Liability

VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility for any damage or loss resulting from the use of this handbook. VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this software. VTech® Electronics North America, L.L.C. and its suppliers assume no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of important data on other media to protect against data loss.

Company:	VTech® Electronics North America, L.L.C.
Address:	1155 West Dundee Road, Suite 130, Arlington Heights, IL 60004 USA
Phone :	1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada

NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

For TVs with a mono audio input: