connected to your PDA.
You can configure your Video Eyewear for left or right eye viewing by selecting the appropriate radio button.
Power Control
Your Video Eyewear draws its power from your PDA. In order to maximize the PDAs’ battery life, the Video Eyewear can be configured to automatically power down if no video display activity is detected for a specified period of time.
This feature is activated by selecting the “Enable” checkbox in the Power Controls group. The idle duration required for it to be invoked is set by dragging the slider left or right. The number of minutes this represents is displayed to the right of the slider bar.
Note: The Power Control is affected by Video Eyewear
Brightness
A vertical slider is provided for adjusting the brightness of your Video Eyewear. A numeric value is displayed below the slider. 0 representing the minimum brightness level, 100 representing the maximum brightness level.
Saving Changes
Press the “Save” button to retain any configuration changes or “Cancel” to exit the Control Panel without saving changes. A “Reset” is also provided to quickly restore the default settings.