WATCHING VIDEO (Cont.)
2 Acknowledgepassword. the warning, then enter the
1.Acknowledge the warning on the screen, then press the Multi Control button. The password entry screen appears.
●If the Multi Control button is not pressed on the warning screen, the password entry screen will not appear.
●The power will be turned off if there is no operation for 1 minute.
2.When the password entry screen appears, press the Multi Control button three times to select the number ‘ ’ for the three digits.
WARNING TO PREVENT
SERIOUS INJURY
SEE MANUAL FOR SAFETY
INFORMATION BEFORE
USING.
MAY DISTURB VISION,
BALANCE OR
COORDINATION.
NOT FOR USE BY
CHILDREN UNDER 16.
PRESS TO CONTINUE.
�
�
ENTER�YOUR PASSWORD.
��
�
�
�
�
�
�
�
�
The
Start playback on the video component. The image will appear on the
●The password is set to when this product is used for the first time or after it is reset (☞pg.
24), therefore, the first entry will always be
.
●If no video signal is input to this unit, the message “INPUT VIDEO SIGNAL.” will appear on the display. If this occurs, check the power and connection to the video component. If a video signal is input, the message will disappear. The power will shut off automatically if a video signal is not input to this unit for approx. 1 minute.
●If you do not wish to use the password registration, you can cancel it. Refer to pg. 26 for REGISTERING, CHANGING OR CANCELING THE PASSWORD.
INPUT VIDEO SIGNAL.