4. ASSEMBLING AND INSTALLATION
WARNING!
Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard.
Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance.
When assembling, be sure to use more then one person. Depending on the assembly work, there are some cases in which working by one person alone can cause personal injury or parts damage.
Ensure that connectors are accurately connected. Incomplete connections can cause electric shock hazard.
Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit or present a fire risk.
This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by
Provide sufficient space so that assembling can be performed. Performing work in places with narrow space or low ceiling may cause an accident and assembly work to be difficult.
To perform work safely and avoid serious accident such as the cabinet's falling down, do not perform work in places where
CAUTION!
Handle molded parts with care. Undue weight or pressure may cause them to break and the broken pieces may cause injury.
To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Performing work without using the step can cause violent falling down accidents.
Tools such as a Phillips type screwdriver are required for the assembly work.
|
| TAMPERPROOF |
Phillips type screwdriver | WRENCH | |
|
| Tool (Included with Unit) |
7 | www.seuservice.com |