LumiSource A44 owner manual Assembly Instructions, Connecting to Game Consoles

Page 4

ASSEMBLY INSTRUCTIONS

Step 1: Lift seatback to the upright position.

STEP 1

Step 2: Secure the seat back using attached hook & loop fasteners.

 

Step 3: Insert receptacle (4) into adapter cord (2).

 

Step 4: Plug adapter (2) into wall outlet.

 

Step 5: Turn Boomchair™ on by turning Power knob (B) clockwise.

 

4

STEP 3

2

CONNECTING TO GAME CONSOLES

Note: Most game consoles are supplied with a custom connector with yellow video out and RCA red/white audio out.

Step 1: Plug yellow composite video cable from game console into video input of TV. (Fig. 1)

Step 2: Plug Red/White RCA cord from game console into RCA INPUT (F) of BoomChair™. (Fig. 2)

Note: It may be necessary to extend your BoomChair™ further away from your TV or console. Here’s how. (Fig.3)

Step 1: Connect Audio Coupler (3c) to Red/White RCA cord from game console.

Step 2: Connect one end of RCA cord (3b) into other end of Audio Coupler (3c).

Step 3: Connect other end of RCA cord (3b) into RCA INPUT (F) of BoomChair™.

GAME CONSOLE

TV

AUDIO COUPLER (3c)

BOOMCHAIR™

Fig. 1

Fig. 3

Fig. 2

 

VIBRATION VOLUME

++ POWER

INPUT OUTPUT

IN

Cable supplied with game console

3c3b

R R

L L



Image 4
Contents A44 Read Before USE FCC WarningDashboard Control Panel SET-UP GuideReceptacle Assembly Instructions Connecting to Game ConsolesConnecting to Portable Audio / Video Devices Connecting to Audio / Video DevicesDaisy Chaining Chairs Together Media DeviceMaintenance and Repair Troubleshooting BoomchairCLEANING/CARE Instructions LUMISOURCE, INC. Limited Warranty