Microsoft RKH-00041, S4G00001 Turn Your Console and Controller on, Connect Additional Controllers

Disposable Battery Safety

Improper use of batteries may result in battery fluid leakage, overheating, or explosion. Risk of explosion if batteries are replaced by an incorrect type. Use and replace only with correct size and type of batteries. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury:

•Keep batteries out of reach of children.

•Do not heat, open, puncture, mutilate, or dispose of batteries in fire.

•Use only alkaline (not rechargeable) batteries, type AA for best performance.

•Do not mix new and old batteries or batteries of different types.

•Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns.

•Remove the batteries if they are worn out or before storing your controller for an extended period of time.

•If a battery leaks, remove all batteries, taking care to keep the leaked fluid from touching your skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s recommendations for cleanup.

•Dispose of batteries in accordance with local and national disposal regulations (if any).

remove Controller batteries aboard aircraft

Before boarding any aircraft or packing the wireless controller in luggage that will be checked, remove any batteries from the wireless controller. The wireless controller can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are installed.

Turn Your Console and Controller on

To turn your console and controller on, press and hold the Xbox Guide button on your controller. To turn on just your console, touch the console power button lightly.

Connect Additional Controllers

To connect additional wireless controllers to your console, or to connect your controller to a different console, follow the steps below. To connect a wireless controller to your console:

To connect a wireless controller to your console:

1Press and hold down the Xbox Guide button until the controller turns on.

2Make sure the console is turned on. If not, touch the console power button and allow the console to completely start up. When the Xbox Dashboard or inserted disc runs, the console is ready.

3Press the connect button on the console and wait for the console lights to spin.

4Press the connect button on the controller and wait for the controller lights to spin.

After the lights on the controller and console spin and flash once, the controller is connected.

Playing Games with Your Controller

For information about how to use the controller with games, see your game instructions. When playing, your controller’s position is indicated by one of four lights around the Xbox Guide button, and you can press the Xbox Guide button to show the Xbox Guide at any time.

5