Function | LED Behavior | Description | ||
DTS TruSurround | Surround On: | Press the Next/Previous button to enable/disable DTS TruSurround. When | ||
|
|
| ||
On/Off |
| Surround Off: | enabled (On), all inputs will produce virtual surround sound. When disabled | |
Surnd |
| (Off), all sources will playback on 3 channels (Left, Center, and Right). | ||
|
| |||
DTS TruVolume | TruVolume On: | Press the Next/Previous button to enable/disable TruVolume. When enabled | ||
| ||||
On/Off |
| TruVolume Off: | (On), TruVolume provides a consistent and comfortable volume level for a more | |
TruVol |
| enjoyable listening experience. | ||
|
| |||
Night Mode On/Off | Night Mode On: | Press the Next/Previous button to enable/disable Night Mode. When enabled | ||
| ||||
Night |
| Night Mode Off: | (On), the Sound Bar will lower bass frequency levels to provide a more quiet | |
| environment (ideal for apartment living and homes with sleeping children). | |||
AV Delay |
| Two center LEDs |
| |
| indicate minimal | Press the Next/Previous button to increase/decrease the amount of audio delay. | ||
AV Delay |
| |||
| delay. | The LED indicators will move to the right with increasing audio delay levels. | ||
TV Remote | TV Remote On: | Press the Next/Previous button to enable/disable VIZIO TV Remotes.When enabled | ||
| ||||
VZtvRmt | On | TV Remote Off: | (On), you can use a VIZIO TV remote control to turn on the Sound Bar (using the TV | |
Volume Up button) and control volume. | ||||
|
|
| ||
Eco Power On/Off | Eco Power On: | Press the Next/Previous button to enable/disable Eco Power Mode. When enabled | ||
| (On), the Sound Bar will go into standby after a period of inactivity. The sound bar | |||
EcoPwr | On |
| ||
Eco Power Off: | will automatically turn off when no audio signal is detected. Off disables this feature. | |||
|
|
| Note: Enable this function if using a TV remote to control the sound bar. | |
Program Remote |
| Press the Next/Previous and Play buttons to toggle and select and program your | ||
Prg Remote | TV remote to control the Volume Down, Volume Up, and Mute functions on your | |||
|
|
| Sound Bar. See Programming the Sound Bar on page 16. | |
Reset |
|
| Press the Next/Previous and Play buttons to select and reset your remote and | |
| Sound Bar to the factory default settings. All paired Bluetooth devices will be | |||
Reset | No | |||
| unpaired. All programmed IR remotes will also be removed. See Resetting to | |||
|
|
| Factory Default Settings on page 17. | |
When a Dolby | Dolby Digital Logo | Dolby Digital and DTS are only available on either the HDMI, Digital Coaxial Audio | ||
| ||||
Digital or DTS | DTS Logo | In, or Digital Optical Audio In inputs.When a Dolby Digital or DTS signal is detected, | ||
signal is detected | the Dolby Digital or DTS logo will light up for 5 seconds before fading away. | |||
| ||||
15