Vizio S5451w-C2 quick start RE-LINKING the Subwoofer with the Sound BAR

Page 28

RE-LINKING THE SUBWOOFER WITH THE SOUND BAR

Your Subwoofer has already been paired with your Sound Bar by VIZIO. However, you may need to re-link the Subwoofer to the Sound Bar if there is no sound coming from the Subwoofer.

What does pairing mean?

Pairing means to wirelessly connect.

1

Back of Subwoofer

First confirm that the power switch is in the ON position.

Press and hold the Pairing button on the back of the Subwoofer for 5 seconds.The LED on the back of the Subwoofer will begin to blink.

2

Back of Sound Bar

Press and hold the Power button on the back of the Sound Bar for 5 Seconds.The LED indicators on the front will flash 3 times.The Subwoofer is now linked with the Sound Bar.

28

Image 28

Contents Vizio Important Safety Instructions Table of Contents Package Contents Back of Sound Bar Power Port Controls & ConnectionsControl Buttons are located here Power Input Bluetooth Input Back of Satellite Speaker FIRST-TIME Setup 5MM to RCA CableBest Connecting with Hdmi Back of TV Page Back of Subwoofer Connect the Satellite Speakers to the Subwoofer Page Vizio Using the Remote VizioSettings and LED Behavior LED Indicators are located hereSurnd When programming your Sound Bar, turn off your TV speakers ConfirmYes Bluetooth Pairing Back of Sound BarUsing Bluetooth Mode Advanced Setup 5MM to RCA CableHdmi Cable Wall Mounting the Sound BAR 38.6 RE-LINKING the Subwoofer with the Sound BAR Wall Mounting the Satellite Speakers SUPPORT.VIZIO.COM Help & Troubleshooting Hear buzzing orONE-YEAR Limited Warranty SpecificationsLegal & Compliance Vizio INC. ALL Rights Reserved OC-NC