Polycom SIP 2.2.0 manual Image Tags, Following image tag is supported Img-Defines an image

Developer’s Guide SoundPoint IP / SoundStation IP

Image Tags

The following image tag is supported:

•<img>—Defines an image

Note	The Microbrowser supports images stored in uncompressed .bmp format. While all
	BMP bit depths will be displayed to the best of the phone’s ability, it is
	recommended that the image format most suitable for the target platform be
	chosen. For example, the SoundPoint IP 601 LCD supports four levels of grey, so a
	16-color BMP format would be most appropriate.
	Images can be scrolled up and down, however images that are too wide will be
	truncated.
	Various platforms have differing limits due to memory. There are also
	differing pixel limits for devices of differing pixel depth. A 1 bit per pixel
	image 160x80 requires only 1600 bytes. For a 24 bit picture, the memory
	requirement is 38400 bytes.
	There are several limits depending on the source data (this involves the cache
	limits in configuration) and the display converted data, which is dependant on
	available RAM (and is limited in the code depending on platform).
	<img>
	The img element defines an image.
Note
	The "align", "border", "hspace", and "vspace" attributes of the image element are
	not supported in XHTML 1.0 Strict DTD.

The following attributes are supported:

Attribute	Value/s	Description
src	URL	The URL of the image to display
	(Ex:
	“http://www.topxml.com/images/to
	pxml_site.gif”
	or ”c:\images\img1.jpg” )
height	Pixels (number, EX: “30” )	Specifies the height of the image
	%	in pixel or percent.
width	Pixels (number, EX: “30” )	Specifies the width of the image in
	%	pixel or percent.

2 - 6