Vizio E550VA, E470VA, E421VA, E371VA user manual Adjusting the Audio Settings

VIZIO 120HZ E SERIES User Manual

Adjusting the Audio Settings

When viewing a DTV / TV or an HDMI, Component, AV, or PC source, the following audio adjustment OSD screens are available when you press MENU on the remote control.

Press ▲ / ▼ / ◄ ► to highlight and select the choice, then press MENU/OK key to select the desired adjustment, and the press the EXIT key when finished making adjustments.

The following options are available in the Audio menu:

1.SRS TruSurround HDTM –- Turn the simulated surround feature On or Off.

2.SRS TruVolumeTM–- When the programming switches to a commercial or when changing from channel to channel, volume fluctuations occur. The SRS TruVolumeTM provides the listener with a comfortable and consistent volume level.

3.Equalizer Settings – To adjust the level for different frequencies of the Stereo audio signal, use this option. This option is available only if SRSTruSurround HD feature is Off.

4.Balance – This option allows for compensation of one channel (Left or Right Audio) being higher or lower than the other in order to bring stereo effect back into balance.

5.Speakers – Turn off the internal TV speakers when listening to the audio

through your home theater system.

6.Digital Audio Out – This option allows selection of the type of processing for the SPDIF (Optical connector) when used with a Receiver/Amplifier/Home Theatre system.

• Auto – Select to detect either Dolby Digital or PCM audio automatically to play through stereo amplifier if Optical Out is being used.

•Forced PCM - Select to output PCM audio to your stereo amplifier if Optical Out is being used.

7.Bass & Treble– Adjust low and high frequency sounds. You can also adjust for bass and treble boost or attenuation. This option is available only if SRSTruSurround HD feature is Off.

8.Reset Audio – This option allows the reset of any changes done to these parameters within the Audio menu.

Version 3/17/2010	37
	www.VIZIO.com