Joytech 240C manual Welcome, Contents, Control Center layout

welcome

Thank you for purchasing the JOYTECH Control Center 240C. Before connecting the Control Center, please familiarize yourself thoroughly with this User Guide so that you fully understand the setup procedure and functions of the product.

contents

Check that you have the following items:

1)Control Center 240C

2)Component Video Cable

3)Audio Cable

4)S-Video/Audio Cable

5)Composite/Audio Cable

6)Ethernet Cable

7)DC Power Adapter

8)Remote Control

9)User Guide

Control Center layout

front view

Power/Standby Input Channel Display Input Selector

Display Settings	Input 7	IR Remote Receiver
Controls

2english

Power / Standby	Press to turn the Control Center power On and Off. The Power/Standby LED will
	illuminate green when the power is on and red when the unit is in standby mode
Input Channel	Each Input Channel name can be programmed in order to identify the AV device that
Display	is connected to each Input Channel
Input Selector	Press to page through and select the required Input Channel
IR Remote Receiver	For use with the Remote Control
Display Setting	These controls are used to program the Input Channel names
Controls	displayed on the LCD Display
Input 7	Primarily used for temporary connection of camcorders and other AV devices to the
	Control Center
rear view
	DC 12V IN

Input 1 Input 2 Input 3 Input 4 Input 5 Input 6 Output

The Control Center has a total of 7 Input Channels. Input 7 is located on the front panel and Inputs 1 to 6 are located on the rear panel.

figure 1

Component Video

Composite Video (yellow)

Left Audio (white)

Right Audio (red)

S-Video		Digital Optical Audio
	Ethernet
	(RJ45)

english 3