Mattel P5959 manual Connecting to Your TV, DVD player Yellow for Video In, White for Audio

CONNECTING TO YOUR TV

	INPUT
White	AUDIO IN
	VIDEO IN
Yellow

TV

OR

VCR/DVD

TV

IMPORTANT! Your TV, VCR or DVD player must have audio and video input jacks. Input jacks may be on the back of your TV, VCR or DVD player.

•Place the base in front of your TV. The base should be three feet away from the TV.

•Locate the plug-and-play cord on the base.

•Plug the audio-video pins into the match- ing colored input jacks on your TV, VCR or

DVD player (Yellow for Video In, White for Audio In).

Hint: The plug-and-play cord is designed to easily disconnect if it is pulled. Simply connect the matching connectors located in the middle of the cord.

Three

Feet

Base Range

•Turn your TV, VCR or DVD player power ON.

•Press the power button on the base to turn it ON.

•To find the picture on your TV screen, set your TV’s, VCR’s or DVD player’s mode selector to INPUT or VIDEO IN.

•Slide the power switch on the controller

ON .

•The controller works best when you are standing in the range between the base feet.

Hint: Bright sunlight or incandescent light may affect the range between the base and the controller. Try dimming the light in the room.

•The base will time out after five minutes of inactivity. Press the power button to turn power OFF and then press again to turn back ON. The controller will time out after two minutes of inactivity. Slide the power switch OFF and then back ON .

6