Pelican PL-2006 manual Select a Channel on the Controller, Select a Channel on the Receiver

Page 8

ENGLISH

4.Select a Channel on the Controller:

You may select any channel you desire 1, 2, 3 or 4.

5.Select a Channel on the Receiver:

This must match the channel selected on the Controller.

Note: If using more then one controller you must use different channel settings, i.e., the first controller and receiver are set to Channel 1, the second controller and receiver are set to Channel 2. The channel position selected on the Eclipse Wireless Controller and Receiver have no relation to the Xbox™ controller ports.

Image 8

Contents Eclipse RF Ref#081803Table of Contents Console Protection Guarantee Product Layout Other Features Power Save ModeProduct Overview Multiple PlayersPlug in the Receiver InstructionsInsert Batteries Check Band setting Select a Channel on the Controller Select a Channel on the ReceiverTurn on the Controller Trouble Shooting My Eclipse does not respondWarranty Card Eclipse Wireless East 27th Street Vernon, CA 90058 USA