Infrared Technology:
1.The 86 in 1 uses Infrared technology. To avoid latency, always make sure the main gaming unit is directly in front of where you are playing.
Sleep Mode:
The 86 in 1 controller will go into sleep mode after 5 minutes of
note: when you power on the 86 in 1 controller the LED will not turn on, this is normal. The LED only illuminates when buttons are used on the controller.
Trouble Shooting:
Problem: 86 in 1 will not power on?
Solution: Confirm batteries in the main gaming unit are inserted correctly.
Solution: Batteries may be drained, so try replacing the batteries with new ones.
Problem: 86 in 1 is not accurate and/or there is latency when playing?
Solution: Confirm batteries in controller/receiver pack are inserted correctly.
Solution: Batteries may be drained, so try replacing the batteries with new ones.
note: to save battery life always switch the power on the controller and receiver to the off position when not in use.
CUSTOMER SUPPORT
dreamGEAR® P.O. Box 478 Torrance, CA 90508
86 in 1
Wireless
dreamGEAR® P.O. Box 478 Torrance, CA 90508
www.dreamgear.net
www.dreamgear.net