Switching on and off, Force connection

PS2-WLC Controller

Note:

Please only use batteries or rechargeable batteries with a nominal voltage of 1.5 V.

Please ensure the batteries are always inserted according to the correct polarity. Replace the batteries with the same brand or similar batteries.

There is a risk of explosion if the batteries are not replaced correctly.

Do not attempt to recharge a non-rechargeable battery. There is a risk of explosion.

Batteries / rechargeable batteries can be fatal if swallowed. Please store batteries out of reach of small children. Seek medical help immediately if a battery has been swallowed.

Do not expose the batteries to heat or flames. Never short-circuit batteries; never try to force open batteries; never attempt to recharge non-rechargeable batteries. Batteries may otherwise explode and cause serious injury.

Never replace the batteries in a potentially explosive area. Sparks may be generated while the batteries are being inserted or replaced which could cause an explosion. Potentially explosive areas are often signposted as such, but not always. These include filling stations, such as under below-deck areas on boats, fuel transmission stations, fuel depots, areas in which the air may contain chemicals or particles such as grain, dust or metallic powder, as well as all other areas in which you would normally be asked to switch off the engine of your car.

6.Switching on and off

The on/off switch is on the back of the device. To switch the unit off move the switch to the “OFF” position and to the “ON” position to switch it on.

7.Connecting the controller

The connection mode will initiate as soon as the On/Off switch on the underside of the unit is switched to the ON position. The RX-LED and MODE-LED lights will light up briefly at the same time. If the RX-LEDcomes on, the device is trying to establish a

connection with the receiver. The RX LED goes out as soon as a connection has been established.

8.Force connection

If several wireless controllers are connected at the same time, you can use the force connection method to select a single controller.

Press the CONNECT button on the hand-held unit and then press the CONNECT button

on the receiver within 15 seconds to establish a connection. Now press the L3 button

and the SELECT button on the hand-held unit and the CONNECT button on the receiver at the same time for 15 seconds.

9.Mode selection

Many games support an analogue controller which permit more precise input than with digital controllers.

There must be a connection to the receiver before you can switch between the digital and analogue modes. To do this, press the ANALOGUE button . The MODE-LED lights up in analogue mode. The MODE-LED is off in digital mode.

Note:

The default mode is digital.

Not all games support digital mode.

You may have to finish the game before switching between modes.

10.Energy-saving mode

The unit is equipped with an energy-saving mode to conserve energy and prolong battery life. This mode is activated in the following situations:

where no connection has been established between the unit and the receiver after 3 seconds

where the unit and receiver are connected but the unit has not been used for 3 minutes

where the connection between controller and receiver has been interrupted and no connection has been established within 6 seconds

where you press the CONNECT button on the hand-held unit without pressing the CONNECT button on the receiver within 15 seconds.

If your unit is in the energy-saving mode, press either the START , L3 , or R3 buttons to reactivate the controller.

11.TURBO functions

With the TURBO function you can switch the U, {, X, , R1, R2, L1 and L2 buttons to the TURBO/rapid fire function. The controller must be connected to the receiver to activate or deactivate the TURBO function.

To activate: Press and hold the TURBO button until the RX-LED comes on. Then press the button for which you want to activate the rapid fire function.

To deactivate: First press the button which you want to reset. Press and hold the TURBO button until the RX-LED goes out.

- 2 -

PS2-WLC specifications

The Silvercrest PS2-WLC is a versatile and innovative wireless charging station designed to streamline the charging experience for a variety of devices, including smartphones, tablets, and various wireless-enabled gadgets. This charging station stands out in the crowded market due to its sleek design, robust technology, and user-friendly features.

One of the main characteristics of the Silvercrest PS2-WLC is its sleek and compact form factor, making it suitable for both home and office environments. Its minimalistic design allows it to blend seamlessly with modern decor while occupying minimal space. The device is lightweight, making it easily portable for use in different locations, whether at home, in the office, or while traveling.

The Silvercrest PS2-WLC employs advanced wireless charging technology, adhering to the Qi standard, which is widely recognized in the industry. This compatibility means that users can charge a broad range of devices, from Apple and Samsung smartphones to other Qi-enabled gadgets. Users benefit from the convenience of wireless charging, eliminating the need for tangled cables and connectors.

Another noteworthy feature of the PS2-WLC is its fast charging capability. With the ability to deliver up to 10W of power for compatible devices, it significantly reduces charging times, allowing users to quickly power up their gadgets and get back to their daily routines. Additionally, the station's built-in overcurrent and overheating protection ensures the safety of the devices being charged, providing peace of mind for users.

The Silvercrest PS2-WLC also features an intelligent charging recognition system. This technology automatically detects the optimal charging speed for each connected device, ensuring efficient energy use and prolonging battery life. Furthermore, the non-slip surface of the charging pad prevents devices from sliding off during charging, maintaining a stable connection.

In conclusion, the Silvercrest PS2-WLC is a remarkable wireless charging solution combining efficiency, safety, and style. Its compatibility with a range of devices, fast charging capability, and intelligent features make it an ideal choice for anyone looking to simplify their charging experience. Whether you are at home, in the office, or on the go, this charging station meets the demands of modern technology users.