Chapter 4 - Metadata
Chapter 4
Metadata
4.1Introduction
The LCP 400 application enables metadata, in the form of story files, to be edited and loaded into the camera and selected for use.
When the mobile device connects to a camera:
–all stories loaded in the LCP 400 application are sent to the camcorder,
–all stories loaded in the camcorder are sent to the LCP 400 application,
–the name of the current recording story in the camcorder is displayed,
–the select story button allows the current recording story to be changed.
4.2Selecting stories
Tap the SELECT STORY button to open the recording story window. This button is dimmed if the camera is switched off or disconnected from the application. It shows a list of all available stories. The recording story window shows the list of available stories including the