Note: To exit calibration mode at any time, press the FN and C key, again. No calibration information will be saved until the entire calibration mode has been completed.
Quick Key Reference Guide
Bluetooth:
1..Searching Last Device (Bluetooth icon blinking)..
2..Searching New Device (Bluetooth icon blinking)..
3..Successful Pairing (Bluetooth icon solid)..
4..Disconnected (Bluetooth icon not visible)..
USB Connection: U will be displayed when USB cord is plugged into computer.. Bluetooth will have preference over the USB connection.. Press FN and W on the Virtual Keyboard to override and connect to USB, even when a previously paired Bluetooth device is in range..
Adjusting Sound (FN and S): Volume level bars will appear..
Adjusting
Adjusting Brightness (FN and B): Brightness level bars will appear..
Calibration (FN and C): Must press C twice – or holding on/off for 10 seconds
1..Shows two icons on top flashing for user to hold the F1 and F12 keys on the first row (beeps for success).. Hold down finger for 3 seconds..
2..Shows two icons on bottom flashing for user to press the outside keys on the bottom row (FN and right arrow).. Hold down fingers for 3 seconds (beeps for success) then goes back to home screen..
18