SMC Networks SMCWCB-G2 manual Introduction, Overview of the product, Features, LED Status

SMCWCB-G2 User Guide

Chapter1. Introduction

1.1 Overview of the product

The EZ Connect™ g 802.11g Wireless Cardbus Adapter (SMCWCB-G2) gives you the flexibility to install your notebook PC in the most convenient location available, without the cost of running network cables.

The adapter's auto-sensing capability allows high packet transfer rate of up to 54Mbps for maximum throughput, or dynamic range shifting to lower speeds due to distance or operating limitations in an environment with a lot of electromagnetic interference. It can also interoperate with all 11Mbps wireless (802.11b) products. Your wireless communications are protected by up to 152-bit WEP and WPA encryption for high security.

1.2 Features

¾Complies with IEEE 802.11g, IEEE 802.11b standards

¾Supports WPA/WPA2 data security, IEEE 802.1x authentication, TKIP/AES encryption, 64/128/152-bit WEP encryption

¾Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/2/1Mbps wireless LAN data transfer rates

¾Provides 32-bit CardBus interface

¾Supports Ad-Hoc and Infrastructure modes

¾Supports roaming between access points when configured in Infrastructure mode

¾Easy to configure and provides monitoring information

¾Supports Windows 2000, XP

¾Internal Antenna

1.3 LED Status

LED Indications	SMCWCB-G2	Working Status
Status Green	Not lit	Disable Radio
Activity Green	Lit
Status Green	Lit	The adapter is trying to scan a networking
Activity Green	Intermittently	connection.
Status Green	Lit	The adapter is transmitting or receiving data.
Activity Green	Flashing

- 1 -