In the Controllers
The controller’s buttons move the robot as follows:
Left Control
Forward
Backward
Forward
Backward
Right Contol
1.Use a Phillips screwdriver to loosen the battery compartment cover screw. Then lift and remove the cov- er.
2.Install the batteries in the compart- ment as indicated by the polarity symbols (+ and
3.Replace the cover and tighten the screw.
When the controller’s range decreases, replace the batteries.
MOVING THE ROBOTS
To turn on a robot, slide ON/OFF on the back of the robot to ON. The robot’s eyes light, he says “Power up,” and an- nounces his name. Then the four power indicators on his chest light. Press the reset button on the robot’s head to verify that all four power indicators are on.
Use the red controller for the red robot and the green controller for the green ro- bot.
2
Forward — Press both the left and right forward control buttons together.
Backward — Press both the left and right backward control buttons together.
Left Turn — Press the right forward control button.
Right Turn — Press the left forward control button.
Rotate Clockwise — Press both the left forward and right backward control but- tons together.
Rotate Counterclockwise — Press both the right forward and left backward control buttons together.
Notes:
•Keep the robot within 15 to 20 feet of the controller.
•Make sure there are no obstructions between the robot and the control- ler.