Agilent Technologies 60502B manual Specifications and Supplemental Characteristics

	Table 60502-1 Specifications and Supplemental Characteristics (continued)
Current Slew Rate:*
Rate # 60 A Range Step		6 A Range Step		Transition Time
1	1 A/ms	0.1	A/s	8.0 ms
2	2.5 A/ms	0.25 A/s		3.2 ms
3	5 A/ms	0.5	A/s	1.6 ms
4	10 A/ms	1 A/ms		800 μs
5	25 A/ms	2.5	A/ms	320 μs
6	50 A/ms	5 A/ms		160 μs
7	0.1 A/μs	10 A/ms		80 μs
8	0.25 A/μs	25 A/ms		32 μs
9	0.5 A/μs	50 A/ms		16 μs
10	1 A/μs	0.1	A/μs	12 μs
11	2.5 A/μs	0.25 A/μs		12 μs
12	5 A/μs	0.5	A/μs	12 μs

	*AC performance specified from 3 to 60 V.
Voltage Slew Rate:
Rate # Voltage Range Step		Transition Time*
1	1 V/ms	8.0 ms
2	2.5 V/ms	3.2 ms
3	5 V/ms	1.6 ms
4	10 V/ms	800 μs
5	25 V/ms	320 μs
6	50 V/ms	160 μs
7	0.1 V/μs	85	μs
8	0.25 V/μs	85	μS
9	0.5 V/μs	85	μS

*Transition time based on low capacitance current source.

Resistance Slew Rate (1 Ω range): Uses the value programmed for voltage slew rate.

Resistance Slew Rate (1 k and 10 kΩ ranges): Uses the value programmed for current slew rate.

Transient Current Overshoot (When programmed from 0A):
Range	Transient Current Level	Current Slew Rate	Overshoot*
60 A	6-60 A	All slew rates	0
	3 A	1 A/μs to 5 A/μs	1%
	3 A	1 A/μs to 0.5 A/μs	0
6 A	6 A	All slew rates	0
	3 A	0.25 A/μs to 0.5 A/μs	1%
	3 A	0.1 A/ms to 0.1 A/μs	0

*Overshoot may be higher during the first five seconds of programming if unit has been operating at full current. Overshoot values assume a total inductance of lμH, or less, in the load leads connected to the D.U.T.

5