EXPLANATION OF CONTROLS
ON THE IR STEREO TRANSMITTER (see figure 1 below)
1.IR transmitting LEDs,to transmit the audio signal to the IR headphone
2.Power on/off switch
3.DC input connector, to power the IR transmitter
4.Recharge cable, to charge the batteries of IR headphone
5.Input stereo audio signal cable with 3.5 mm jack connector
(FRONT) | 1 |
| 3 |
| 2 |
| (BACK) |
| 5 |
Figure 1 | 4 |
ON THE STEREO HEADPHONE RECEIVER (see figure 2 below)
6.Power on/off LED indicator
7.Volume control
8.Power on/off switch
9.IR sensors, to receive IR signals from the transmittes
10.Recharge cable input socket to recharge the batteries of the IR headphone
11.Charge LED indicator
9
6
8
7 | 10 11 RIGHT | LEFT |
Figure 2
3