Safety and Environment, Description | AKG Acoustics PSU4000 instruction

1 Safety and Environment

1.1Safety 1. Do not spill any liquids on the equipment and do not drop any objects through the ventilation slots in the equipment.

2.The equipment may be used in dry rooms only.

3.The equipment may be opened, serviced, and repaired by authorized personnel only. the equipment contains no user-serviceable parts.

4.Before connecting the equipment to power, check that the AC mains voltage stated on the equipment is identical to the AC mains voltage available where you will use the equipment.

5.To avoid the risk of electric shock, make sure to connect the equipment to a grounded power outlet. It is illegal to disconnect the protective ground wire or use a non-standard power plug.

6.Prior to connecting receivers to the equipment, compare the output voltage of the equipment with the operating voltages of all receivers. Only connect receivers operating on the same voltage, type of current (AC or DC), and having the same connector polarity as the outputs on the PSU 4000.

7.The current drain on the DC OUT 1 output of the equipment must never exceed 2.5 A, the current drain on outputs DC OUT 2 and DC OUT 3 must never exceed 2 A.

8.Never short any of the equipment's outputs!

9.Never apply any voltage to any of the equipment's outputs. Never connect any type of power supply to a PSU 4000 output. This may cause damage to both the equipment and the power supply.

10.If any solid object or liquid penetrates into the equipment, shut down the sound system immediately. Disconnect the power cable from the power outlet immediately and have the equipment checked by AKG service personnel.

11.If you will not use the equipment for a long period of time, disconnect the power cable from the power outlet. Please note that the equipment will not be fully isolated from power when you set the on/off switch to OFF.

12.Do not place the equipment near heat sources such as radiators, heating ducts, or amplifiers, etc. and do not expose it to direct sunlight, excessive dust, moisture, rain, mechanical vibrations, or shock.

13.To avoid hum or interference, route all cables away from high-voltage lines of any type.

14.Clean the equipment with a moistened (not wet) cloth only. Be sure to disconnect the power cable from the power outlet before cleaning the equipment! Never use caustic or scouring cleaners or clean- ing agents containing alcohol or solvents since these may damage the enamel and plastic parts.

15.When routing cables, make sure that nobody can trip over them. 16.Do not use any accessories except those recommended by AKG.

17.Do not use the equipment for any applications other than those described in this manual. AKG can- not accept any liability for damages resulting from improper handling or misuse.

1.2Environment 1. When scrapping the equipment, separate the case, circuit boards, and cables, and dispose of all com- ponents in accordance with local waste disposal rules.

2.The packaging of the equipment is recyclabe. To dispose of the packaging, make sure to use a col- lection/recycling system provided for that purpose and observe local legislation relating to waste dis- posal and recycling.

2 Description

2.1Introduction Thank you for purchasing an AKG product. This Manual contains important instructions for setting up and operating your equipment. Please take a few minutes to read the instructions below carefully before operating the equipment. Please keep the Manual for future reference. Have fun and impress your audi- ence!

The PSU 4000 is a power supply with three 12 V DC outputs for powering a WMS 4000 multichannel sys-

*Refer to figs. 3 and 4. See		tem. The unit features a 1-U 19" case for rack mounting*.
SR 4000 manual for details.		The PSU 4000 replaces the AC adapters that come with the various WMS 4000 components and thus
		greatly simplifies the setting up of multichannel wireless systems.
2.2 Unpacking

1 PSU 4000

1 IEC power cable

3 connecting cables with DC connectors

1 19" rack mount kit

Check that the packaging contains all of the components listed above. Should anything be missing, please contact your AKG dealer.

PSU 4000

PSU4000 specifications

The AKG Acoustics PSU4000 is a robust power supply unit designed for professional audio applications, providing reliable and consistent power for a variety of AKG microphones and wireless systems. Renowned for its engineering excellence, the PSU4000 is an essential component for audio professionals seeking durability and performance in their sound systems.

One of the primary features of the PSU4000 is its ability to deliver stable power to multiple devices. It offers a DC output voltage of both 12V and 48V, making it compatible with a wide range of microphones, including condenser models that require phantom power. This flexibility allows audio engineers to utilize various microphones without the need for multiple power supplies, streamlining setups in both studio and live environments.

The design of the PSU4000 emphasizes portability and convenience. Its compact form factor makes it easy to integrate into existing audio setups, whether on stage or in a studio. The unit is built with a rugged construction, making it resilient against the rigors of touring and frequent use. This durability ensures that audio professionals can depend on the PSU4000 even in demanding situations.

In addition to its power capabilities, the PSU4000 features advanced noise-reduction technology that minimizes interference and ensures crystal-clear audio quality. This is particularly important in professional settings where fidelity is paramount. By reducing unwanted noise, the PSU4000 allows for a cleaner sound, enhancing the overall listening experience.

Connecting to the PSU4000 is straightforward, thanks to its intuitive interface and clearly labeled inputs and outputs. This user-friendly design facilitates quick setup and allows audio engineers to focus on their craft without getting bogged down in technical complications.

Moreover, the PSU4000 is equipped with built-in protection features that safeguard against overvoltage and short circuits. This aspect of its design not only prolongs the life of connected equipment but also provides peace of mind to users, knowing that their gear is well-protected.

Overall, the AKG Acoustics PSU4000 stands out as a top-tier power supply solution for audio professionals. With its reliable power output, noise reduction capabilities, durable construction, and user-friendly design, it meets the demands of diverse audio environments, delivering exceptional performance that professionals can trust. Whether in the studio or on the road, the PSU4000 is a vital tool for achieving high-quality sound.