Electromagnetic Compatibility EMC | Axis Communications T8640

Electromagnetic Compatibility (EMC)

This equipment has been designed and tested to fulfill applicable standards for:

•Radio frequency emission when installed according to the instructions and used in its intended environment.

•Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.

USA - This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Europe - This digital equipment fulfills the requirements for RF emission according to the Class A limit of EN 55022 when DC powered. NOTICE! This is a Class A product. In a domestic environment this product may cause RF interference, in which case the user may be required to take adequate measures.

Europe - This digital equipment fulfills the requirements for RF emission according to the Class B limit of EN 55022 when PoE powered.

This product fulfills the requirements for immunity according to EN 55024 office and commercial environments.

Canada - This Class A digital apparatus complies with Canadian ICES-003 when DC powered.

Canada - This Class B digital apparatus complies with Canadian ICES-003 when PoE powered.

Australia - This digital equipment fulfills the requirements for RF emission according to the Class A limit of AS/NZS CISPR 22 when DC powered. NOTICE! This is a class A product. In a domestic environment this product may cause RF interference, in which case the user may be required to take adequate measures.

Australia - This digital equipment fulfills the requirements for RF emission according to the Class B limit of AS/NZS CISPR 22 when PoE powered.

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

T8640 specifications

The Axis Communications T8640 is a cutting-edge PoE (Power over Ethernet) mid-span solution designed specifically for surveillance applications. This innovative device is essential for simplifying the deployment of network cameras and other devices that require power and connectivity through Ethernet cables. The T8640 is engineered to support Power over Ethernet according to the IEEE 802.3af/at/bt standards, allowing it to deliver up to 60 watts of power per port, making it suitable for high-performance devices.

One of the standout features of the T8640 is its ability to power not only standard network cameras but also demanding products such as pan-tilt-zoom (PTZ) cameras and multi-sensor models. This versatility enables users to implement a wide range of surveillance solutions without needing to install additional power sources. The T8640 can support a total of four network devices, each capable of receiving sufficient power for optimal operation.

The T8640 is equipped with advanced technologies to enhance its functionality and reliability. It boasts an integrated surge protection system, safeguarding connected devices from potential damage caused by electrical surges. This is particularly crucial in outdoor installations where environmental conditions can be unpredictable. Additionally, the T8640 features a compact and lightweight design, making it easy to install in various locations without occupying much space.

A significant aspect of the T8640 is its energy efficiency. By utilizing PoE technology, it eliminates the need for multiple power adapters and reduces overall cabling complexity, leading to lower installation costs and improved system reliability. The device also supports plug-and-play functionality, allowing for rapid deployment and ease of use.

Furthermore, the T8640 is built with security in mind. It supports advanced network protocols, ensuring secure data transmission and protection against unauthorized access. Its robust design can withstand harsh environmental conditions, making it suitable for both indoor and outdoor use.

In summary, the Axis Communications T8640 PoE mid-span is a powerful, efficient, and reliable solution for modern surveillance systems. With its ability to deliver high power levels, support for multiple devices, and focus on security and durability, the T8640 meets the demands of various security environments, ensuring comprehensive surveillance coverage without the complications of traditional power solutions.