Panasonic SC-HT640W manual To adjust speaker level during play, Speaker Sp aker level adjustments

HT640WAdjusting.bookPagethe 27Thursday,volume of eJanuarych 5,200611:19AM

speaker: Sp aker level adjustments

This is one f the ways to get appropriate su round effects.

Preparation

Press [DVD].

1 While stopped and no on- creen display is shown

Press and hold [—TEST] to output a test signal.

≥To stop the test signal, press and hold [—TEST] again.

	L: Front left	C: Center	R: Front right
	RS: Right surround	LS: Left surround
	≥There is no output from SW (subwoofer) channel.
2	Press [VOLUME, r] or [s] to set the volume level
	normally used for listening.
3	Press [3] (increase) or [4] (decrease) to adjust the
	speaker level for each speaker.

≥Adjust the speaker levels to the same level as the front speakers. C, RS, LS: `6 dB to i6 dB

∫To adjust speaker level during play

[Effective when playing multi-channel audio or when Dolby Pro Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on, and Surround Music is off.]

1Press [CH SELECT] to select the speaker. L #C #R #RS #LS #SW

^-----------------------------------------------------}

SW: Subwoofer

≥You can adjust SW only if the disc includes a subwoofer channel.

≥“SW” does not appear on the display and is not adjustable when “ÎPLII” is lit.

≥“S” appears on the display when “MOVIE”, “SPORT” or “MUSIC” is selected with Sound Field Control (➜ page 26).

In this case, you can adjust both surround speaker levels at the same time using [3, 4].

S: `6 dB to i6 dB

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

≥To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

Using sound effects

RQT8611

27