Tefal VU9050T0 manual Button A, speed selection

VU9050_1800134191-01_ARTIK-CRYSTAL_1800134191/01 12/09/14 14:02 Page3

EN

Button B, selection of REDUCTION or VARIATION mode:

VARIATION :		REDUCTION :
Random cyclical speeds (80-second duration)	Random cyclical speeds (80-second duration)
	+ progressively slower speeds every 30 minutes
Pre-selection of speed	Pre-selection of speed
Speed
		Speed variation
	0
Pre-selection of speed	Pre-selection of speed
Speed
		Speed
		variation
		Speed variation
	0	30 minutes
Pre-selection of speed	Pre-selection of speed
Speed
		Speed
		variation Speed
		variation
		Speed variation
	0	30 minutes 60 minutes

Pre-select the starting speed according to your requirements (see table above), then select the REDUCTION or VARIATION mode (according to the instructions below):

-If you press button B once, the appliance goes into VARIATION mode and the 'VARIATION' light comes on.

-If you press button B a second time, the appliance goes into REDUCTION mode and the 'REDUCTION' light comes on.

-To switch this function off, press button B a third time.

• Button A, speed selection:

-If you press button A once, the appliance is set to speed 1 and the light comes on.

-If you press button A a second time, the appliance is set to speed 2 and the light comes on.

-If you press button A a third time, the appliance is set to speed 3 and the light comes on.

-If you press button A again, the appliance goes back to speed 1 and the light comes on.

•Button E, immediate stop/start button for the appliance. IMPORTANT: You are advised to unplug the appliance when not in use.

3