ACTIFRY2EN1_5087420_MISE EN PAGE 1 29/04/12 08:43 PAGE12
Using the tray on its own
Get your food ready
• Open the lid – fig.1. | When using the tray on its |
• Remove the 2in1 spoon – fig.3. | own, do not put food into |
• Lift the handle up – fig.4 and remove the tray handle – fig.5. | the bowl. |
•Fit the handle on the tray – fig.6.
•Remove the tray – fig.7.
•Place your food on the tray making sure you always keep to the quantities recommended in the cooking tables and/or the recipe book (please see “"Cooking table for 2in1"” for tray quantities). Never exceed the "MAX“ level marker shown on the centre of the tray – fig.22.
•Put the tray back in the appliance
•Put the 2in1 handle back, then fold it away.
•Close the lid.
Opening the lid stops the cooking. You can resume cooking by pressing on the start button after it has been switched off.
Once the lid has been open for 2 minutes the appliance will go into
Start the cooking
•Connect the detachable power cord to the appliance and plug it in
– fig.13.
•Push the switch 0/ – fig.14, the appliance will make a beep sound and the screen displays 00.
•Adjust the cooking time using the button
(see “Cooking table”).
•Select the type of food you want to cook in the tray using the
button 2 in1 – fig.23 and 24.
press once
press twice
press three times
press four times (for desserts and fruit)
•Press the start button 
. The minute countdown starts. The countdown will only be displayed in seconds when there is less than a
minute left.
•You can adjust the cooking time at any time by pressing on the buttons 
.
Remove your food
•When the cooking is finished, the timer will sound and the screen will start flashing and displaying 00
cooking your food. You can stop the buzzer by pressing on the start
button 
– fig.19.
•Open the lid.
•Clip the handle on to the tray – fig.26.
•Remove the tray.
•Serve your food.
12