Sharp FU-Z31E Installation Guidelines, Filter Guidelines, Leave about 60cm of space from the wall

Page 5

CAUTIONS CONCERNING OPERATION

•Do not block the intake and/or air outlet.

•Do not use the unit near or on hot objects, such as stoves or heaters or where it may come into contact with steam.

•Do not lay the unit down when using.

•Always hold the handle on both sides of the unit when moving it.

Holding the back panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury.

•Do not operate the unit without the filter.

•Do not wash and reuse the filter .

Not only does it not improve filter performance, but also may cause electrical shock or malfunction.

•Clean the exterior with a soft cloth only. The unit surface may be damaged or cracked.

In addition, the sensors may malfunction as a result.

INSTALLATION GUIDELINES

•During the operation of the product, please place the unit at least 2 m away from equipment utilizing electrical waves such as televisions, radios or wave clocks.

•Avoid locations where curtains, etc., come into contact with the intake or air outlet.

Curtains, etc., may become dirty or a malfunction may occur.

•Avoid locations where the unit is exposed to condensation, due to rapid temperature changes.

(If it is unavoidable please allow unit to stand for 1 hour before switching on.) (Use under appropriate conditions between 0 and 35˚C in the room.)

•Place on a stable surface with sufficient air circulation.

When placing the unit on a heavily carpeted area, it may cause the unit to vibrate slightly.

•Do not install when there is a possibility of soot, such as in a kitchen, etc.

The unit surface may crack as a result.

•Leave about 60cm of space from the wall.

The wall behind the air outlet may become dirty as time passes. When using the unit for extended period of time in the same location, use a vinyl sheet, etc., to prevent the wall from becoming dirty. In addition, periodically clean the wall.

INDONESIA ENGLISH

FILTER GUIDELINES

•Follow the instructions in this manual for correct care and maintenance of the filter. Use only filter designed for this product.

E-3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents FU-Z31E Dust Collection / Deodorising Filter Elements removed by filterEnglish Important Safety Instructions Filter Guidelines Installation GuidelinesPlace on a stable surface with sufficient air circulation Leave about 60cm of space from the wallPlasmacluster Ion ON/OFF Indicator Light Illustrative DiagramPart Names Main Unit DisplayHandle Tab Filter Date Label Air Outlet Back Panel Air Inlet Power Cord PlugIncluded Back Remove the filter Filter InstallationReplace the Back Panel to the main unit Main Unit Operation OperationWhenever dust accumulates On the unit or every 2 months Care and MaintenanceUnit Filter About 2 years after opening Filter Replacement GuidelinesModel FZ-Y30SFE Dust Collection / Deodorizing Filter 1 unitTroubleshooting MAX MED LOW SpecificationsSharp Corporation

FU-Z31E specifications

The Sharp FU-Z31E is a sophisticated air purifier designed to enhance indoor air quality through advanced technology and innovative features. Combining efficiency with user-friendliness, this air purifier caters to both residential and office environments, making it an ideal choice for those seeking a healthier atmosphere.

One of the standout features of the FU-Z31E is its state-of-the-art Plasmacluster Ion Technology. This technology releases positive and negative ions into the air, which helps to neutralize airborne pollutants, including viruses, bacteria, and allergens. By mimicking the natural ion balance found in outdoor environments, it effectively reduces the presence of harmful substances, promoting a healthier living space.

The FU-Z31E also incorporates a multi-layer filtration system, which includes a pre-filter, activated carbon filter, and a HEPA filter. The pre-filter captures larger particles such as dust and pet hair, while the activated carbon filter effectively absorbs odors and harmful gases. The HEPA filter, renowned for its efficiency, captures 99.97% of particles as small as 0.3 microns, including pollen, smoke, and other irritants, ensuring a thorough cleansing of the air.

In terms of design, the Sharp FU-Z31E is sleek and modern, making it suitable for a variety of settings. The unit features an intuitive control panel, allowing users to easily adjust settings and monitor air quality levels. It also operates quietly, making it a perfect addition to bedrooms or quiet workspaces.

Another significant feature of the FU-Z31E is its energy-efficient operation. With a low power consumption rate, it offers a sustainable solution for maintaining air quality without significantly increasing energy bills. The smart sensors automatically adjust the purification level based on the detected air quality, ensuring optimal performance while conserving energy.

For convenience, the Sharp FU-Z31E is easy to maintain. The filters are designed for long-lasting use, with replacement indicators that notify users when it’s time for a change. This eliminates the guesswork in maintenance, ensuring that the air purifier operates at peak efficiency.

In summary, the Sharp FU-Z31E combines advanced filtration technology, user-friendly features, and elegant design to deliver a powerful air purification solution. With its Plasmacluster technology, comprehensive filtration system, energy efficiency, and ease of maintenance, it is an excellent investment for anyone looking to improve their indoor air quality.
Top Page Image Contents