Sharp FU-W53E, FU-W43E operation manual Filter Guidelines

Page 5

IMPORTANT SAFETY INSTRUCTIONS

CAUTIONS CONCERNING OPERATION

•Do not block the intake and/or air outlet.

•Do not use the unit near or on hot objects, such as stoves or heaters or where it may come into contact with steam.

•Do not lay the unit down when using.

•Always hold the handle on the back of the unit when moving it.

Holding the front panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury.

•Do not operate the unit without the filter.

•Do not wash and reuse HEPA filter .

It not only does not improve filter performance, it may cause electric shock or malfunction.

•Clean the exterior with a soft cloth only.

The unit surface may be damaged or cracked.

In addition, the sensors may malfunction as a result.

INSTALLATION GUIDELINES

•During the operation of the product, please place the unit at least 2 m away from equipment which are subject to electrical waves such as televisions, radios or wave clocks.

•Avoid a location where the sensor is exposed to direct wind.

The unit may not operate properly.

•Avoid locations where curtains, etc., come into contact with the intake or air outlet.

Curtains, etc., may become dirty or a malfunction may occur.

•Avoid locations where the unit is exposed to condensation, due to drastic temperature changes.

(Use under appropriate conditions between 0 and 35˚C in the room.)

•Place on a stable surface with sufficient air circulation.

When placing the unit on a heavily carpeted area, it may cause the unit to vibrate slightly.

•Do not install when there is generation of lampblack, such as in a kitchen, etc.

The unit surface may crack or the sensor may malfunction as a result.

•Leave about 60cm of space from the wall.

The wall behind the air outlet may become dirty as time passes. When using the unit for extended period of time in the same location, use a vinyl sheet, etc., to prevent the wall from becoming dirty. In addition, periodically clean the wall.

ENGLISH

FILTER GUIDELINES

• Follow the instructions in this manual for correct care and maintenance of the filters.

E-3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents FU-W53E FU-W43E Please read before operating your new Air Purifier English Important Safety Instructions Filter Guidelines Main Unit Display Part NamesIncluded Remove the Filter Support Filter InstallationRemove the Front Panel Replace the Front Panel Place the Hepa Filter intoMain unit ION Shower Mode Button Power ON/OFF ButtonOperation Main Unit OperationLights Control Button Plasmacluster ON/OFF ButtonFilter Care and MaintenanceMain Unit Hand Wash only Do not Tumble DRY Washable Active Carbon Filter CareHepa Filter / Washable Active Carbon Filter Filter Replacement GuidelinesRemedy not a malfunction TroubleshootingStandby Power SpecificationsOther Countries outside the EU Memo English Sharp Corporation

FU-W53E, FU-W43E specifications

The Sharp FU-W53E and FU-W43E are advanced air purifiers designed to enhance indoor air quality through their innovative technologies and user-centric features. Both models share significant similarities and cater to households looking for efficient and reliable air purification solutions.

One of the standout features of the FU-W53E and FU-W43E is their Plasmacluster technology. This technology utilizes positive and negative ions to neutralize airborne particles, including allergens, bacteria, and viruses. The Plasmacluster ions are distributed throughout the room, creating a cleaner and healthier environment by breaking down harmful substances on surfaces as well.

Both models boast a high-performance HEPA filter capable of capturing 99.97% of particles as small as 0.3 microns. This includes common allergens such as pollen, dust mites, and pet dander, making them ideal for allergy sufferers. Additionally, these air purifiers are equipped with activated carbon filters that effectively absorb odors and volatile organic compounds (VOCs), ensuring the air remains fresh and pleasant.

The FU-W53E model, designed for larger spaces, can purify air efficiently in rooms up to 53 square meters, while the FU-W43E is suitable for slightly smaller areas up to 43 square meters. Both models feature a sleek and modern design, allowing them to blend seamlessly into any home or office environment.

With their intelligent sensors, these air purifiers can automatically detect air quality and adjust their fan speed accordingly. The auto mode optimizes performance, ensuring that the air is purified effectively without unnecessary energy consumption. Users can also operate both models using an easy-to-read LED display, which provides real-time feedback on the air quality and the current operating mode.

Energy efficiency is another hallmark of the FU-W53E and FU-W43E, with both devices certified with the Energy Star label. This means they consume minimal electricity while delivering maximum performance, making them an environmentally friendly choice.

In summary, Sharp's FU-W53E and FU-W43E air purifiers combine advanced technologies, including Plasmacluster ionization and HEPA filtration, to deliver exceptional air quality. Their user-friendly features, intelligent operation modes, and energy-efficient designs make them a valuable addition to any home focused on health and well-being.
Top Page Image Contents