Sharp FU-40SE operation manual Installation, When Using the Unit on a Tabletop Mounting the Stand

Page 8

INSTALLATION

WHEN USING THE UNIT ON A TABLETOP

MOUNTING THE STAND

1

Remove the front panel.

• At this time, also remove the pre-filter,

 

stamina-power carbon and the HEPA

 

filter.

1

 

Front panel

2

1

2 Place the unit with its front side facing down on a flat and stable surface.

Place a soft cloth, etc., to prevent damaging the unit.

3 Insert the tabs on the stand into the holes on the main unit and fix the stand using the included thumbscrews (2 units).

Tabs Holes

Thumb- screws

WHEN USING THE UNIT WITH A MOUNTED WALL

CAUTION

When mounting the air purifier to the wall, the mounted wall will become dirty as time passes. To prevent this, place a vinyl sheet, etc., around the unit.

A wall side to install is to choose the place to have the strength done firmly.

In the case of a wall or concrete wall with little strength, request installation to a specialist such as an electric appliance shop, etc.

Do not install in a location with heavy lamp- black, such as in a kitchen, etc. The unit sur- face may crack as a result.

1 Determine the mounting location

Leave space around the bracket by referring to the illustration below. The unit cannot be mounted if there is insufficient spacing around the bracket.

75cm or more

69cm or more from the ceiling

Size of main unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

75cm or more

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

75cm

or more

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mounting

60cm or

more from

 

bracket 1

 

 

 

 

 

 

 

 

 

 

60cm

or more

sidewall

 

 

 

 

 

 

 

from sidewall

 

 

 

 

 

 

 

 

 

 

CAUTION

Mount on a flat sur- face

Do not mount the unit to a location that is not flat such as a wall with a door header, etc.

Do not mount the unit to a thin wall with little strength such as a plas- terboard, etc. The unit may fall and can be very dangerous.

E-6

Image 8
Contents FU-40SE Purificatore DELL’ARIA Manuale OperativoPage Features ContentsSafety Precautions Periodically remove dust from the power plugDo not USE the Remote Control in the Following Locations Take Caution to the Following During InstallationAbout the Filter Effective UsageDiagram About the CLEAN-SIGN LampNames of Parts Main Unit DisplayBack AccessoriesCluster ION Lamp Installation When Using the Unit on a Tabletop Mounting the StandWhen Using the Unit with a Mounted Wall Remove the front panelRemoving the Unit Installing the Filters Inserting Batteries in the Remote ControlPreparation About the batteriesInstall the filter Back of the front panel and then mount the front panelOperation mode suitable for the usage condition can be set OperationRemote Control OperationOdor Sensor Dust Sensor Care and MaintenanceMain Unit Cluded with the replacement filters. Affix the label on top Guide for Life of FiltersReplacing the Filters After replacing the filtersRemedy not a malfunction TroubleshootingSymptom 22-22 Нагайке-чо, Абено-ку, Осака 545-8522, Япония OSAKA, Japan Service Procedure only Effective in GermanyService Vorgehensweise Gilt NUR FÜR Deutschland

FU-40SE specifications

The Sharp FU-40SE is a powerful air purifier designed to create a cleaner, healthier indoor environment. With its sleek design and advanced technologies, this unit caters to households seeking improved air quality.

One of the standout features of the FU-40SE is its highly efficient Plasmacluster ion technology. This innovative system generates positive and negative ions that saturate the air, effectively neutralizing airborne contaminants such as bacteria, viruses, and allergens. The Plasmacluster technology has been extensively tested and shown to reduce microorganisms in the air, making it an excellent choice for allergy sufferers and those concerned about indoor pollutants.

The FU-40SE also boasts a multi-layer filtration system, notably featuring a HEPA filter. This filter can trap particles as small as 0.3 microns, including dust, pollen, and smoke. Coupled with the deodorizing filter, which minimizes unpleasant odors from pets, cooking, or smoking, the purification process ensures that the air remains fresh and clean.

Moreover, the device is equipped with a smart sensor system that continuously monitors air quality. When harmful particles are detected, the FU-40SE automatically adjusts its fan speed to optimize performance. This real-time adaptability not only enhances the efficiency of the air purifier but also ensures quiet operation, which is particularly beneficial for nighttime use.

The design of the FU-40SE is user-friendly, featuring intuitive controls that allow one to easily select different purification modes according to the specific needs of the environment. Its compact size and modern aesthetic make it suitable for various rooms, from bedrooms to living areas, blending seamlessly with home decor.

Energy efficiency is another hallmark of the Sharp FU-40SE. It operates quietly without consuming excessive electricity, making it an eco-friendly option for those looking to maintain a sustainable lifestyle.

In summary, the Sharp FU-40SE air purifier stands out for its advanced Plasmacluster technology, multi-layer filtration system, smart sensory capabilities, and efficient design. It is an ideal solution for individuals and families seeking to improve their indoor air quality while enjoying the benefits of a stylish, silent, and energy-efficient appliance. With its ability to combat allergens and odors effectively, the FU-40SE is a worthwhile investment for a healthier living space.