Sharp FP-N60CX Remote Control Limitations, Installation Guidelines, Filter Guidelines

Page 9

CAUTIONS CONCERNING THE OPERATION OF THIS PRODUCT

•Do not block the intake and air outlet.

•Do not use the unit near or on hot objects, such as a stove. Also, do not use the unit where it may come into contact with steam.

•Do not use the unit on its side.

Deformation, malfunction and/or overheating of the motor may occur as a result.

•Do not install when there is generation of oily residue, such as in a kitchen.

•Do not use detergent when cleaning the unit. The unit surface may become damaged or cracked. In addition, the sensors may malfunction as a result.

•Do not operate the unit without the filter.

It will have no purification effect. In addition, it becomes the cause of the trouble.

•Do not wash and reuse True HEPA filter.

Not only it does not improve filter performance, it may cause electric shock or malfunction.

•Let Washable Active Carbon Filter dry thoroughly after cleaning it. Wet filter may damage True HEPA filter, and it may cause strong odor.

•When transporting the unit, always hold the handle on the back of the unit.

Holding the front panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury.

REMOTE CONTROL LIMITATIONS

DO NOT USE THE REMOTE CONTROL IN THE FOLLOWING LOCATIONS

•Any location where there is inverter lighting equipment or electronic spontaneous lighting equipment

The remote control may become inoperative. In this case, move away from such lighting equipment or change direction.

•Location exposed to direct sunlight

The unit may not receive signals from the remote control.

The unit may not respond to the signals of the remote control if the ends of fluorescent lighting become black or lights flicker due to the depletion of service life; however, this is not a malfunction of the remote control or the main unit. In this case, replace the lighting with new fluorescent tubes.

INSTALLATION GUIDELINES

•Leave at least 7 feet (2m) of space from equipments which involve electric wave such as televisions, radios or wave clocks.

Electrical interference may occur if not.

•Leave at least 2 feet (60cm) of space from the wall The motor may overheat, causing malfunction if not.

•Avoid a location where sensors are exposed to direct wind The unit may not operate properly.

•Avoid a location where curtains, etc., come into contact with the intake or air outlet. Curtains, etc., may become dirty or malfunction may occur as a result.

EFFECTIVE OPERATION

• Place on a stable surface with sufficient air circulation

FILTER GUIDELINES

•Do not wash and reuse the True HEPA Filter. It does not work effectively, and may become a cause of electric shock.

•The wall behind the air outlet may become dirty as time passes. When using the unit for extensive period in the same location, use a vinyl sheet, etc., to prevent the wall from becoming dirty. In addi- tion, periodically clean the wall, etc.

ENGLISH

E-7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents FP-N60CX Page English For Your Protection the United States Consumer Limited Warranty for the U.S. Users Consumer Limited WarrantyFor Your Protection Canada Limited Warranty Risk of Electric Shock Safety PrecautionsRemote Control Limitations Installation GuidelinesFilter Guidelines Main Unit Display Part NamesMAX Pollen h CLEAN-SIGN LightBack AccessoriesClose the back cover Battery Information Remote Control USEPreparation Remove the back coverFilter Installation Place the unit facing upRemove the Front Panel Filter Installation Main Unit Operation OperationAuto CleanIon Control OffRinse thoroughly with clean water Care and MaintenanceWashable Active Carbon Filter Care Remove excess waterFilter Cleaning Dust Sensor Odor Sensor Main UnitDust Sensor Odor SensorGuide for filter replacement timing Filter Replacement GuidelinesReplacement Filters Disposal of FiltersCan this filter be washed? When should I wash this filter? Operation GuideWill washing improve the filter’s performance? Remedy not a malfunction TroubleshootingStandby Power SpecificationsEnglish Page Mode contrôle d’ions Mode de nettoyageMode d’ions Plasmacluster Auto FiltresPour Vous Protéger Accessoires Autres InformationsGarantie Limitée Risque D’ÉLECTROCUTION Précautions DE SécuritéPrécautions Concernant LE Fonctionnement DE CET Appareil Affichage DE L’UNITÉ Principale Désignation DES PiècesVoyant CLEAN-SIGN indication d’état de propreté Accessoires Retirez le couvercle arrière PréparationIntroduisez les piles Refermez le couvercle arrièreRetirez le panneau avant Placez l’appareil avec la façade vers le hautRemplissez la date de début ’utilisation sur l’étiquette de Installation du filtreAuto Nettoyage Clean Automatique AutoContrôle d’ions ION Control Désactivé OFF Trempez le filtre environ 30 minu- tes avant de le laver Soin ET EntretienRincez abondamment avec de l’eau propre Retirez l’excès d’eauLaissez le filtre sécher complètement Réinstallationmarrage. du filtre et RedéSec et doux Essuyez avec un chiffon’utilisez pas de solvants ’utilisez pas de détergentsRemplacement des filtres Guide de remplacement des filtresLes filtres Élimination des filtresLe lavage va-t-il améliorer l’efficacité du filtre ? Guide D’UTILISATIONSolutions pas un dysfonctionnement Résolution DES ProblèmesConsommation en veille CaractéristiquesEnglish Sharp Electronics Corporation

FP-N60CX specifications

The Sharp FP-N60CX is a cutting-edge air purifier designed to enhance indoor air quality for homes and offices. Equipped with advanced technologies, this device effectively filters and cleans the air, making it an excellent choice for individuals who prioritize health and wellness.

One of the standout features of the FP-N60CX is its Plasmacluster technology. This innovative system releases positive and negative ions into the air, which work to neutralize harmful microorganisms, including viruses and bacteria. This helps create a healthier environment by minimizing airborne pollutants, making it particularly beneficial for allergy sufferers and those with respiratory conditions.

The FP-N60CX boasts a high-performance HEPA filter that captures 99.97% of particles as small as 0.3 microns. This includes dust, pollen, pet dander, and other allergens, ensuring that the air breathed indoors is clean and safe. The HEPA filter is complemented by an activated charcoal filter that effectively absorbs odors from cooking, pets, and smoke, further improving air quality.

In terms of usability, the Sharp FP-N60CX features a user-friendly interface with an intuitive control panel. It includes multiple fan speeds, allowing users to customize the air purification intensity based on their needs. The device also operates quietly, making it ideal for bedrooms and quiet spaces.

Another key characteristic of the FP-N60CX is its coverage area. It is designed to purify the air in medium to large rooms, making it versatile for various applications from living rooms to offices. The 360-degree air intake system ensures that air is drawn in from all directions, maximizing its efficiency in purifying the air.

Additionally, the Sharp FP-N60CX is equipped with a filter replacement indicator that alerts users when it’s time to replace the filters. This feature helps maintain optimal performance and assures users that they are consistently breathing clean air.

In conclusion, the Sharp FP-N60CX combines advanced air purification technologies, such as Plasmacluster and HEPA filtration, with user-friendly features to create a reliable and efficient air purifier. Its ability to enhance indoor air quality makes it an essential addition to any home or workspace focused on creating a healthy living environment. Investing in the Sharp FP-N60CX is a step towards improving overall well-being and ensuring cleaner air for you and your loved ones.
Top Page Image Contents