Sharp FP-R30CX operation manual Do not USE the Remote Control in the Following Locations

Page 9

IMPORTANT SAFETY INSTRUCTIONS

CAUTIONS CONCERNING OPERATION

•Do not block the intake and air outlet.

•Do not use the unit near or on hot objects, such as range or where it may come into contact with steam.

•Do not use the unit on its side.

•Always hold the handle on the back of the unit when moving it.

Holding the front panel when carrying may cause it to detach, thus dropping the unit and resulting in bodily injury.

•Do not operate the unit without the filter.

•Do not wash and reuse HEPA filter and Active Carbon Filter.

Not only it does not improve filter performance, it may cause electric shock or malfunction.

•Clean the exterior with a soft cloth only. The unit surface may be damaged or cracked.

In addition, the sensor may malfunction as a result.

REMOTE CONTROL LIMITATIONS

DO NOT USE THE REMOTE CONTROL IN THE FOLLOWING LOCATIONS:

•Any location where there is inverter lighting equipment or electronic spontaneous lighting equipment

The remote control may become inoperative. In this case, move away from such lighting equipment or change direction.

•Location exposed to direct sunlight

The unit may not receive signals from the remote control.

INSTALLATION GUIDELINES

•During the operation of the product, please place the unit at least 7 feet(2m) away from equipments which involve electric wave such as televisions, radios or wave clocks, in case electrical interference occurs to such equipments.

•Avoid a location where the sensor is exposed to direct wind. The unit may not operate properly.

•Avoid locations where curtains, etc., come into contact with the intake or air outlet. Curtains, etc., may become dirty or a malfunction may occur.

•Avoid locations where the unit is exposed to condensation, due to drastic temperature changes.

•Place on a stable surface with sufficient air circulation.

•Do not install when there is generation of lampblack, such as in a kitchen, etc. The unit surface may crack or the sensor may malfunction as a result.

•Leave at least 2 feet(60cm) of space from the wall.

The wall behind the air outlet may become dirty as time passes. When using the unit for extensive period in the same location, use a vinyl sheet, etc., to prevent the wall from becoming dirty. In addi- tion, periodically clean the wall, etc.

FILTER GUIDELINES

• Follow the instructions in this manual for correct care and maintenance of the filters.

ENGLISH FRANÇAIS

E-7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents FP-R30CX Please read before operating your new Air Purifier English For Customerassistance the United States Consumer Limited Warranty for U.S. Users Consumer Limited WarrantyFor Customer Assistance Canada Limited Warranty Valid in Canada only Important Safety Instructions Location exposed to direct sunlight Do not USE the Remote Control in the Following LocationsLights Plasmacluster CLEAN-SIGN Light Indicator Light Remote Control 1 unit Battery AA battery xPart Names Preparation Remote Control USERemove the back cover Insert batteriesFilter Installation Install the filters Mode Selection Button Power ON/OFF ButtonOperation mode can be switched OperationDetermining the Base Impurity Rate About the CLEAN-SIGNBlue light Green lightClean Remote Control Operation PollenAuto ION ControlFilter Cleaning Care and MaintenanceMain Unit Odor SensorGuide for filter replacement timing Filter Replacement GuidelinesReplacement Filters Disposal of FiltersSymptom TroubleshootingRemedy not a malfunction Lamp Indication RemedyStandby Power SpecificationsEnglish Français Remarque Mode contrôle d’ions Mode nettoyageContrôle des ions Plasmacluster Équipe responsablePour Téléphoner Composez le 1-905-568-7140 pour Pour Vous ProtégerGarantie Limitée Page Les endroits exposés au soleil ’UTILISEZ PAS LA Télécommande Dans LES Endroits SuivantsDésignation DES Pièces Télécommande 1 unitéPiles 2 AA Manuel d’utilisationInsertion des piles PréparationPose DES Filtres Pose des filtres Medium Moyen FonctionnementVoyant vert Détermination DE LA Pureté DE L’AIRBouton OFF-Timer Bouton Auto Fan Speed Vitesse automatique du VentilateurBouton de fonctionnement Unité Principale Soin ET EntretienGuide DE Remplacement DES Filtres Résolution DE Problèmes État DU Voyant SolutionSymptômes MAX Moyenne Silencieuse CaractéristiquesFrançais Osaka, Japan Sharp Plaza, Mahwah New Jersey 07430-2135 U.S.A

FP-R30CX specifications

The Sharp FP-R30CX is a sophisticated air purifier designed to enhance indoor air quality and create a healthier living environment. This compact yet powerful unit employs advanced technologies to effectively eliminate harmful particles, allergens, and odors from the air, making it an excellent choice for homes and offices.

One of the standout features of the FP-R30CX is its Plasmacluster technology. This innovative system releases positive and negative ions into the air, effectively neutralizing airborne pollutants while also inhibiting the growth of mold and bacteria. This technology not only cleans the air but can also improve overall well-being by creating a fresher indoor environment.

The FP-R30CX features a multi-stage filtration system that includes a pre-filter, HEPA filter, and activated carbon filter. The pre-filter captures larger particles such as dust and pet dander, while the HEPA filter targets smaller allergens like pollen and smoke particles, boasting a filtration efficiency of 99.97% for particles down to 0.3 microns. The activated carbon filter works to absorb odors and volatile organic compounds (VOCs), ensuring that the air is not only clean but also pleasant-smelling.

Moreover, the FP-R30CX operates quietly, making it suitable for use in bedrooms and quiet workspaces. It offers multiple fan speed settings, allowing users to customize the airflow according to their needs. Additionally, the unit is designed with an eco-friendly mindset, utilizing energy-efficient technology that helps reduce electricity consumption.

Another notable characteristic of the Sharp FP-R30CX is its compact design, making it easy to place in various locations around the home or office without occupying much space. The user-friendly controls and filter replacement indicators ensure that maintaining the unit is a hassle-free experience.

For added convenience, the FP-R30CX features a smart sensor that detects air quality in real-time. This sensor automatically adjusts the fan speed to provide optimal purification based on the level of pollution detected, ensuring that the air remains clean at all times.

Overall, the Sharp FP-R30CX is an effective air purification solution that combines advanced filtration technologies, user-friendly features, and a sleek design. With its ability to significantly improve indoor air quality, it is a worthwhile investment for anyone looking to promote a healthier living or working environment.
Top Page Image Contents